TongDe M-113 A.P.C. - Asking for any/all Ideas from those who also have one, or even just want one

This board is for talk about tanks after WW2. The ups and downs. The ins and outs. All of it here.
User avatar
tankme
Lieutenant
Posts: 3080
Joined: Tue Oct 31, 2017 3:51 pm
Location: Elgin, TX
Contact:

Re: TongDe M-113 A.P.C. - Asking for any/all Ideas from those who also have one, or even just want one

Post by tankme »

RobW wrote: Sat Nov 01, 2025 11:11 am Thanks tankme. Are those extra fuel tanks glued onto the base hull as supplied or on the sprues?
I don't have one, but it looks like he bought the TongDE A2 version and that the tanks are on it out of the box.
Derek
Too many project builds to list...
Marc780
Sergeant
Posts: 506
Joined: Wed Mar 05, 2014 1:34 pm

Re: TongDe M-113 A.P.C. - Asking for any/all Ideas from those who also have one, or even just want one

Post by Marc780 »

tankme wrote: Thu Oct 30, 2025 12:14 am ...I would say if you are trying to make it a Vietnam era M113, you might want to ditch the external fuel tanks on the back. The M113A2 first introduced those and the A2 was developed after Vietnam ended. If it matters that is.
Thanks Tankme, I didn't know any of that! Probably should cut them off for authenticity but the tail lights are attached - at this point I think I'm leaving those fuel tanks alone. I'll probably wind up buying yet another one of these eventually, in a different configuration. Somebody's even offering an add-on weapon for the M113, a recoil-less rifle. It is non functional but looks kind of awesome, it costs $36
Image
But for the next project I'm leaning towards buying either one of the M109 howitzers, or maybe an M60. What I'd really like to see is for them to come out with a T-55, or maybe even a T-62! I tried building the Hooben T-55, twice, and was never satisfied with the finished model i ended up with. I hope one day somebody decides to make them.
User avatar
jhamm
Warrant Officer 2nd Class
Posts: 1078
Joined: Fri May 19, 2017 7:21 am
Location: Germany
Contact:

Re: TongDe M-113 A.P.C. - Asking for any/all Ideas from those who also have one, or even just want one

Post by jhamm »

RobW wrote: Sat Nov 01, 2025 11:11 am Thanks tankme. Are those extra fuel tanks glued onto the base hull as supplied or on the sprues?
They mounted with three little countersunk screws on each side....
User avatar
tankme
Lieutenant
Posts: 3080
Joined: Tue Oct 31, 2017 3:51 pm
Location: Elgin, TX
Contact:

Re: TongDe M-113 A.P.C. - Asking for any/all Ideas from those who also have one, or even just want one

Post by tankme »

Marc780 wrote: Wed Nov 05, 2025 8:15 am
tankme wrote: Thu Oct 30, 2025 12:14 am ...I would say if you are trying to make it a Vietnam era M113, you might want to ditch the external fuel tanks on the back. The M113A2 first introduced those and the A2 was developed after Vietnam ended. If it matters that is.
Thanks Tankme, I didn't know any of that! Probably should cut them off for authenticity but the tail lights are attached - at this point I think I'm leaving those fuel tanks alone.
Yeah, they had to move the light mounts to the tops of the tanks when they switched over to them as the lights were bolted to the armor right where the tanks go.
Derek
Too many project builds to list...
Post Reply

Return to “Modern Tanks”