King Tigerman's Tamiya Jagdpanther

Post Reply
User avatar
King Tigerman
Recruit
Posts: 40
Joined: Mon Dec 26, 2011 4:19 am
Location: Founder & President of Southeast Queensland Armoured RC Club, Browns Plains, Queensland, AUSTRALIA

King Tigerman's Tamiya Jagdpanther

Post by King Tigerman »

I thought that i would give everyone on this forum a look at my current build of a Jagdpanther.

I have built and still doing upgrades to these Tamiya Tanks: King Tiger, Tiger 1, Panther G, and a M26 Pershing.
Attachments
IMG_0781.JPG
IMG_0779.JPG
IMG_0778.JPG
IMG_0777.JPG
IMG_0775.JPG
IMG_0774.JPG
IMG_0769.JPG
IMG_0768.JPG
IMG_0766.JPG
IMG_0765.JPG
1/16 Tamiya Leopard 2 A6
1/16 Tamiya M1A2 Abrams
1/16 Tamiya King Tiger
1/16 Tamiya Tiger 1 x 2 Afrika Korps
1/16 Tamiya M26 Pershing
1/16 Heng Long King Tiger Porsche Turret IR

Building 1/16 Tamiya M1A2 Abrams Australian ADF
Top
User avatar
King Tigerman
Recruit
Posts: 40
Joined: Mon Dec 26, 2011 4:19 am
Location: Founder & President of Southeast Queensland Armoured RC Club, Browns Plains, Queensland, AUSTRALIA

Re: King Tigerman's Tamiya Jagdpanther

Post by King Tigerman »

More photos of my JP
Attachments
IMG_0798.JPG
IMG_0797.JPG
Schumo Resin Turret Door. Note that I had to make up a handle out of a piece of sprue, due to a fault in the moulding
Schumo Resin Turret Door. Note that I had to make up a handle out of a piece of sprue, due to a fault in the moulding
Schumo Resin Mantle
Schumo Resin Mantle
IMG_0790.JPG
IMG_0789.JPG
IMG_0788.JPG
IMG_0787.JPG
Impact Bearings
Impact Bearings
I am using the Schumo Hex Head Bolts on the lower hull
I am using the Schumo Hex Head Bolts on the lower hull
1/16 Tamiya Leopard 2 A6
1/16 Tamiya M1A2 Abrams
1/16 Tamiya King Tiger
1/16 Tamiya Tiger 1 x 2 Afrika Korps
1/16 Tamiya M26 Pershing
1/16 Heng Long King Tiger Porsche Turret IR

Building 1/16 Tamiya M1A2 Abrams Australian ADF
Top
User avatar
King Tigerman
Recruit
Posts: 40
Joined: Mon Dec 26, 2011 4:19 am
Location: Founder & President of Southeast Queensland Armoured RC Club, Browns Plains, Queensland, AUSTRALIA

Re: King Tigerman's Tamiya Jagdpanther

Post by King Tigerman »

More JP photos
Attachments
IMG_0824.JPG
I have used the spare Impact links from both the JP Impact Tracks and the Panther G Impact Tracks to make up 3 sets of 2 links left side and 3 sets of 2 links right side, for the Spare Link Brackets
I have used the spare Impact links from both the JP Impact Tracks and the Panther G Impact Tracks to make up 3 sets of 2 links left side and 3 sets of 2 links right side, for the Spare Link Brackets
IMG_0812.JPG
IMG_0811.JPG
IMG_0810.JPG
IMG_0806.JPG
I assembled the main gun Alloy Trunnion with the elevation motor/traverse motor assembly. The Tamiya Trunnion is a plastic unit.
I assembled the main gun Alloy Trunnion with the elevation motor/traverse motor assembly. The Tamiya Trunnion is a plastic unit.
IMG_0804.JPG
IMG_0802.JPG
IMG_0801.JPG
1/16 Tamiya Leopard 2 A6
1/16 Tamiya M1A2 Abrams
1/16 Tamiya King Tiger
1/16 Tamiya Tiger 1 x 2 Afrika Korps
1/16 Tamiya M26 Pershing
1/16 Heng Long King Tiger Porsche Turret IR

Building 1/16 Tamiya M1A2 Abrams Australian ADF
Top
User avatar
King Tigerman
Recruit
Posts: 40
Joined: Mon Dec 26, 2011 4:19 am
Location: Founder & President of Southeast Queensland Armoured RC Club, Browns Plains, Queensland, AUSTRALIA

Re: King Tigerman's Tamiya Jagdpanther

Post by King Tigerman »

More JP photos
Attachments
I am using a Schumo Main Gun Barrel and Schumo Resin Detailed Gun Surround. The Tamiya main gun is shorter
I am using a Schumo Main Gun Barrel and Schumo Resin Detailed Gun Surround. The Tamiya main gun is shorter
IMG_0850.JPG
I have used the Aber Side Skirt sprue to make tow cable support brackets. (Recycling) LOL
I have used the Aber Side Skirt sprue to make tow cable support brackets. (Recycling) LOL
IMG_0845.JPG
Just fitted the Aber Side Skirts
Just fitted the Aber Side Skirts
IMG_0835.JPG
IMG_0833.JPG
IMG_0828.JPG
IMG_0826.JPG
Schumo Spare Track Link Holders fitted
Schumo Spare Track Link Holders fitted
1/16 Tamiya Leopard 2 A6
1/16 Tamiya M1A2 Abrams
1/16 Tamiya King Tiger
1/16 Tamiya Tiger 1 x 2 Afrika Korps
1/16 Tamiya M26 Pershing
1/16 Heng Long King Tiger Porsche Turret IR

Building 1/16 Tamiya M1A2 Abrams Australian ADF
Top
User avatar
King Tigerman
Recruit
Posts: 40
Joined: Mon Dec 26, 2011 4:19 am
Location: Founder & President of Southeast Queensland Armoured RC Club, Browns Plains, Queensland, AUSTRALIA

Re: King Tigerman's Tamiya Jagdpanther

Post by King Tigerman »

More JP photos
Attachments
IMG_0856.JPG
Finished priming the side skirts tonight. The darker ring that is present in this and the next photo is the shadow of the circular fluro lamp above the tank
Finished priming the side skirts tonight. The darker ring that is present in this and the next photo is the shadow of the circular fluro lamp above the tank
IMG_0854.JPG
IMG_0853.JPG
IMG_0852.JPG
1/16 Tamiya Leopard 2 A6
1/16 Tamiya M1A2 Abrams
1/16 Tamiya King Tiger
1/16 Tamiya Tiger 1 x 2 Afrika Korps
1/16 Tamiya M26 Pershing
1/16 Heng Long King Tiger Porsche Turret IR

Building 1/16 Tamiya M1A2 Abrams Australian ADF
Top
User avatar
ruben2005
Sergeant
Posts: 664
Joined: Wed Oct 19, 2011 2:40 pm
Location: swindon wilts

Re: King Tigerman's Tamiya Jagdpanther

Post by ruben2005 »

:thumbup: :clap: :clap: :clap: :wave: very nice, top job fella, keep the pics coming
fetch me the kitty's lets go to war
Top
User avatar
King Tigerman
Recruit
Posts: 40
Joined: Mon Dec 26, 2011 4:19 am
Location: Founder & President of Southeast Queensland Armoured RC Club, Browns Plains, Queensland, AUSTRALIA

Re: King Tigerman's Tamiya Jagdpanther

Post by King Tigerman »

I have a question in regards to the Battle Unit I.R Emitter.

Has anyone that has built a JP found a good location to fit the I.R emitter?

I am looking at fitting it in behind the drivers vision slit or fitting it up the gun barrel in place of the flash unit.

With the drivers vision slit I noticed that the bottom of the slit would partially block the beam because of the round aluminium tube, so I don't know if this is an issue or not.
1/16 Tamiya Leopard 2 A6
1/16 Tamiya M1A2 Abrams
1/16 Tamiya King Tiger
1/16 Tamiya Tiger 1 x 2 Afrika Korps
1/16 Tamiya M26 Pershing
1/16 Heng Long King Tiger Porsche Turret IR

Building 1/16 Tamiya M1A2 Abrams Australian ADF
Top
User avatar
Red Devils
Staff Sergeant
Posts: 872
Joined: Sun May 06, 2012 2:38 pm
Location: Edmonton, Alberta, Canada
Contact:
Contact Red Devils

Re: King Tigerman's Tamiya Jagdpanther

Post by Red Devils »

Great looking Jagdpanther...
The Princess Patricia's Canadian Light Infantry
First in the Field - Since 1914.
Top
User avatar
buckeye36
Lance Corporal
Posts: 188
Joined: Sat May 01, 2010 7:29 pm
Location: EHT, NJ

Re: King Tigerman's Tamiya Jagdpanther

Post by buckeye36 »

You could put the emitter in the barrel with the flash unit right behind it.
Yellowshaker and I have done it with several of our tanks and it works fine.
Tamiya Tiger 1, Tamiya M4 (105) HVSS, Tamiya Jagdpanther G1, ElMod Jagdpanther G2, ElMod KV-1E, ElMod StuG 40 G
Top
User avatar
King Tigerman
Recruit
Posts: 40
Joined: Mon Dec 26, 2011 4:19 am
Location: Founder & President of Southeast Queensland Armoured RC Club, Browns Plains, Queensland, AUSTRALIA

Re: King Tigerman's Tamiya Jagdpanther

Post by King Tigerman »

Thanks buckeye36.

I was talking to mate Reaper332 and that same thing was talked about.

I really don't want to go down that path unless it is impossible to put the emitter in the drivers vision slit.

If I have to use the main gun I won't fit the flash as it is only for show anyway.

My idea is to flatten the emitter tube on the bottom, but would that have any effect on the I.R beam?
1/16 Tamiya Leopard 2 A6
1/16 Tamiya M1A2 Abrams
1/16 Tamiya King Tiger
1/16 Tamiya Tiger 1 x 2 Afrika Korps
1/16 Tamiya M26 Pershing
1/16 Heng Long King Tiger Porsche Turret IR

Building 1/16 Tamiya M1A2 Abrams Australian ADF
Top
Post Reply

Return to “Jagdpanther”