T-35 3D Printed
Forum rules
If you're planning on posting a log of your build please use the relevant build sections.
If you're planning on posting a log of your build please use the relevant build sections.
T-35 3D Printed
1:16 scale, fully animated:
Renault FT, British WW1 Mk. 4), Pz 1A DAK, 1B, II L, III, StuG III, PzKpfw IV, StuG IV, King Tiger, T-34/76, KV-1E, T-35A 3DP, Zik-2, T-90, M3 Lee, M4 Sherman, M26 Pershing, M41 Bulldog, M1 Abrams. In the works: Ram II, Pz 1 Breda. 
Re: T-35 3D Printed
Ya. The 3D original was designed and made by a local Canadian that is a part of the Can/Am RC Tank club (He has unfortunately been absent lately...).
You can thank Dean Rauch for his superb efforts.
https://www.thingiverse.com/thing:3064387
https://can-amrctankclub.canadian-forum ... nted-t-35a
The finish on some of these 3D tanks by individuals, such as yourself, is amazing BTW.
You can thank Dean Rauch for his superb efforts.
https://www.thingiverse.com/thing:3064387
https://can-amrctankclub.canadian-forum ... nted-t-35a
The finish on some of these 3D tanks by individuals, such as yourself, is amazing BTW.
-
HERMAN BIX
- Major-General
- Posts: 11380
- Joined: Sun Jan 12, 2014 12:15 am
- Location: Gold Coast,Australia
Re: T-35 3D Printed
Just staggeringly good, and very well presented.
HL JAGDPANTHER,HL TIGER 1,HL PzIII MUNITIONSCHLEPPER, HL KT OCTOPUS,HL PANTHER ZU-FUSS,HL STuG III,HL T34/85 BEDSPRING,
HL PZIV MALTA,MATORRO JAGDTIGER,HL F05 TIGER,TAMIYA KT,HL PANTHERDOZER,HL EARLY PANTHER G,TAIGEN/RAMINATOR T34/76,
HL AN-BRI-RAM SU-85
HL PZIV MALTA,MATORRO JAGDTIGER,HL F05 TIGER,TAMIYA KT,HL PANTHERDOZER,HL EARLY PANTHER G,TAIGEN/RAMINATOR T34/76,
HL AN-BRI-RAM SU-85
Re: T-35 3D Printed
I put together another video, with some production values. (Some footage is the same, but not all.)
Renault FT, British WW1 Mk. 4), Pz 1A DAK, 1B, II L, III, StuG III, PzKpfw IV, StuG IV, King Tiger, T-34/76, KV-1E, T-35A 3DP, Zik-2, T-90, M3 Lee, M4 Sherman, M26 Pershing, M41 Bulldog, M1 Abrams. In the works: Ram II, Pz 1 Breda.
-
Afrikakorps
- Corporal
- Posts: 250
- Joined: Sun Jun 14, 2015 1:40 am
- Location: Australia
Re: T-35 3D Printed
Excellent work, really well done Bob. 
Panzer III G
Sherman M4A3 (105)
T-34/76 (1942)
Panzer IV Wirbelwind
Sturmtiger
KV-2
M26 Pershing
T-34/76 (1943)
KV-1
M3 Lee
Ferdinand / Elephant
M16 Half-track
Panther G
M4a1 (75mm)
M41 Walker Bulldog
JS-2
M4a3e8 (76mm)
Japanese Type94
FT-17
Tiger 1
Sherman M4A3 (105)
T-34/76 (1942)
Panzer IV Wirbelwind
Sturmtiger
KV-2
M26 Pershing
T-34/76 (1943)
KV-1
M3 Lee
Ferdinand / Elephant
M16 Half-track
Panther G
M4a1 (75mm)
M41 Walker Bulldog
JS-2
M4a3e8 (76mm)
Japanese Type94
FT-17
Tiger 1
-
Herr Dr. Professor
- Major
- Posts: 5476
- Joined: Mon Apr 22, 2019 10:48 pm
- Location: Southern Wisconsin USA
Re: T-35 3D Printed
What an accomplishment. It must be fun to be able to turn all those turrets independently or simultaneously. I'd be that keeps you as busy as...well, an overstressed T35 commander. 
Congratulations on a true winner.
Congratulations on a true winner.Re: T-35 3D Printed
My secret is "delegating", something a good commander should do. Specifically, I found a programming module that allows one to set up a sequence of motions, each independently of the other. It runs the four auxiliary turret servos off one servo channel, in this case from either the recoil or elevation functions. Pololu Maestro, on the web.Herr Dr. Professor wrote:What an accomplishment. It must be fun to be able to turn all those turrets independently or simultaneously. I'd be that keeps you as busy as...well, an overstressed T35 commander.
Since we do IR battles, I'd thought of putting emitters in all the turrets - one I can aim, and four that are aimed randomly. What a broadside! It'd make up for the lack of maneuverability.
Renault FT, British WW1 Mk. 4), Pz 1A DAK, 1B, II L, III, StuG III, PzKpfw IV, StuG IV, King Tiger, T-34/76, KV-1E, T-35A 3DP, Zik-2, T-90, M3 Lee, M4 Sherman, M26 Pershing, M41 Bulldog, M1 Abrams. In the works: Ram II, Pz 1 Breda.
-
Herr Dr. Professor
- Major
- Posts: 5476
- Joined: Mon Apr 22, 2019 10:48 pm
- Location: Southern Wisconsin USA
Re: T-35 3D Printed
"Since we do IR battles, I'd thought of putting emitters in all the turrets - one I can aim, and four that are aimed randomly." That set up might get a reaction not only from other tanks, but from other tankers.
