Barrel distrace problem in 3D recoil

[leopardgreece]

Hi everybody. Can anyone help me with that? The Taigen Tiger metal barrel is very short to fit in the 3D recoil system...!It has no thin long tube to fit in properly..I can't find any solution..... Thank you.

????? ?? SM-N950F ???????????? Tapatalk

[leopardgreece]

I find one solution.....Make shorter the unit!!!!!

????? ?? SM-N950F ???????????? Tapatalk

[ronnie42]

Why don't you make one , rc robotic shops or Ebay have all the parts needed. Here is one i made for the King Tiger

Track for servo recoil

If you make one its easy to get scale recoil distance

[leopardgreece]

Its very nice.....And where u place the servo ? It must moove up and down with that ....!

????? ?? SM-N950F ???????????? Tapatalk

[tomhugill]

I find one solution.....Make shorter the unit!!!!!

????? ?? SM-N950F ???????????? Tapatalk

Cut the narrow bit of tube out, drill the barrel out and use some longer brass tube

[leopardgreece]

Its cool solution but i don't have much time to find any brass tube Thank you very very much i ll keep it in mind

????? ?? SM-N950F ???????????? Tapatalk

[ronnie42]

The servo bracket goes on the square support ,just need to fit a cog to the servo and check position for clearance.

[leopardgreece]

? will try my mode and if it fails i would like to try the mode with the extended tube. I like it very much

????? ?? SM-P605 ???????????? Tapatalk

[Jarlath]

Both the Clark and JCC recoil units extend out to the front of the recoil unit, so those are alternative options should your modifications not work out.

[leopardgreece]

Ok my friend thank you very much I will search for them

????? ?? SM-N950F ???????????? Tapatalk