advice

Feel free to discuss anything and everything to do with tanking here!
Post Reply
User avatar
JTS
Lance Corporal
Posts: 171
Joined: Sat May 02, 2009 6:03 pm

advice

Post by JTS »

Hi all


      Newbie question again

I am getting close to finishing the painting of my Tiger 1 should the hull mg be silver or gun metal in colour?

I thought gun metal but in quite a few photos of member's models it is silver?

Sorry for troubling you all with such a basic question


Thanks for any forthcoming advice


                                                                  Jim
Rivetcounter
Sergeant
Posts: 540
Joined: Sat Sep 27, 2008 12:04 pm
Location: Brussels, Belgium

Re: advice

Post by Rivetcounter »

gun metal
They shall not grow old as we who are left grow old.
Age shall not weary them, nor the years condemn.
At the going down of the sun and in the morning,
WE WILL REMEMBER THEM
nw explorer
Private
Posts: 88
Joined: Sat May 30, 2009 6:40 pm
Location: Southport Lancs

Re: advice

Post by nw explorer »

gun metal,definately
mcevoyi
2nd Lieutenant
Posts: 2294
Joined: Fri Sep 26, 2008 11:24 pm
Location: Now Living in Cyprus .... Modellers desart ...

Re: advice

Post by mcevoyi »

paint it matt black

then use a pencil to highlight .. try it ..looks brill
A tidy desk
is a sure sign of a sick mind ?
User avatar
JTS
Lance Corporal
Posts: 171
Joined: Sat May 02, 2009 6:03 pm

Re: advice

Post by JTS »

Thanks for the advice I have a bottle of gun metal so I will go with that, as for the pencil trick I think I might try that with my next tiger!


Thanks again


                    Jim
User avatar
oz
Warrant Officer 2nd Class
Posts: 1051
Joined: Sat Oct 11, 2008 10:47 am
Location: UK

Re: advice

Post by oz »

gunmetal paint looks OK but its a bit one dimensional, as mcevoyi says black then the pencil method does look much better then on top of that a teeny dry-brush with pure silver to catch the high points  ..............oz
Last edited by Anonymous on Sun Jul 26, 2009 10:10 pm, edited 1 time in total.
User avatar
fv432
2nd Lieutenant
Posts: 2517
Joined: Mon Jul 21, 2008 5:44 pm
Location: swindon

Re: advice

Post by fv432 »

just used the newish gunmetal from humbrol and it gives a good finish starts of black then you polish it with a dry cloth and it highlights it
User avatar
Mackem
Staff Sergeant
Posts: 752
Joined: Thu Oct 02, 2008 4:22 am
Location: Sunderland

Re: advice

Post by Mackem »

Vallejo Panzer Aces kit No.5 has a paint colour they call track primer.
When you add the water you get a sort of muddy pink colour which changes over the space of a couple of hours to a nice base metal colour. Give it a black pinwash then rub over with pencil lead to add some highlights.

Cheers
John
HE/HL Leopard 2-A5, HL Pz IV-F1, HL Jagdpanther (WIP), M26A1 Pershing (WIP), HL Pz III M (WIP), Bandai Hummel (WIP)
Post Reply

Return to “General Discussion”