
Mato renew its Tiger 1
Mato renew its Tiger 1
Mato renew its Tiger 1 with torsion bar and new track tensioners. Any idea? worth a buy?


H/L Pantiger, H/L Leopard 2A6, Mato Panzer III, Hybrid Tiger 1 and some tank wreckage
Re: Mato renew its Tiger 1
Think taigen lower is better value and does the same job
- jarndice
- Colonel
- Posts: 8397
- Joined: Mon Sep 03, 2012 11:27 am
- Location: the mountains of hertfordshire
Re: Mato renew its Tiger 1
The sole advantage to the MATO Metal hull is that it comes with a Metal Backplate and if you had gone through as many failed plastic locating tabs on the Taigen Plastic Backplate as I have you would see the value of it,
BUT if you buy the MATO Metal Backplate separately you can get it to fit the TAIGEN Metal Hull and have the best of both worlds.
The only difference is that the MATO Backplate is too short and the locating tabs do not align with the TAIGEN Holes but these are easy fixes.
Of course you could always buy "LUDWIGS" Tiger 1 Metal Backplate and save yourself the extra work But you would have to buy or make the Backplate fittings that are standard on the Taigen and MATO Backplates.
Shaun.
BUT if you buy the MATO Metal Backplate separately you can get it to fit the TAIGEN Metal Hull and have the best of both worlds.
The only difference is that the MATO Backplate is too short and the locating tabs do not align with the TAIGEN Holes but these are easy fixes.
Of course you could always buy "LUDWIGS" Tiger 1 Metal Backplate and save yourself the extra work But you would have to buy or make the Backplate fittings that are standard on the Taigen and MATO Backplates.
Shaun.
I think I am about to upset someone 

Re: Mato renew its Tiger 1
Taigen hull comes with the back plate fitted already
- jarndice
- Colonel
- Posts: 8397
- Joined: Mon Sep 03, 2012 11:27 am
- Location: the mountains of hertfordshire
Re: Mato renew its Tiger 1
Yes Tom But it is Plastic and the tabs holding it to the Metal Hull fail which is why I fit Metal Backplates instead.
Shaun.
Shaun.
I think I am about to upset someone 

Re: Mato renew its Tiger 1
To the taigen hull or mato?jarndice wrote:Yes Tom But it is Plastic and the tabs holding it to the Metal Hull fail which is why I fit Metal Backplates instead.
Shaun.
- jarndice
- Colonel
- Posts: 8397
- Joined: Mon Sep 03, 2012 11:27 am
- Location: the mountains of hertfordshire
Re: Mato renew its Tiger 1
I like the "Taigen" Metal Hull but not the Plastic Backplate with its weak plastic locating tabs, which is why I favour "Ludwig's" or "Mato's" Metal Backplate which I fit on the "Taigen" Hull instead.
Shaun.
Shaun.
Last edited by jarndice on Mon Oct 23, 2017 3:38 pm, edited 1 time in total.
I think I am about to upset someone 

Re: Mato renew its Tiger 1
Woah there, I was just asking to make sure we weren't talking at cross purposes.
I've never seen people have this issue with a taigen tiger hull, myself I've had 4 with plastic rear and my impression is that it's very strong. But as they say your mileage may vary.
I've never seen people have this issue with a taigen tiger hull, myself I've had 4 with plastic rear and my impression is that it's very strong. But as they say your mileage may vary.
- jarndice
- Colonel
- Posts: 8397
- Joined: Mon Sep 03, 2012 11:27 am
- Location: the mountains of hertfordshire
Re: Mato renew its Tiger 1
Tom it's not the high mileage it's my incompetance
I will tinker all the time even when there is nothing wrong,
I still don't believe that Heng Long, Taigen or Torro can build a Tank as good as I can,
Shaun.

I will tinker all the time even when there is nothing wrong,
I still don't believe that Heng Long, Taigen or Torro can build a Tank as good as I can,

Shaun.
I think I am about to upset someone 

Re: Mato renew its Tiger 1
Ain't that the truth! I get where you're comming from.jarndice wrote:Tom it's not the high mileage it's my incompetance![]()
I will tinker all the time even when there is nothing wrong,
I still don't believe that Heng Long, Taigen or Torro can build a Tank as good as I can,![]()
Shaun.
