Simple Brass Machinegun

This section contains tips and tricks on building and running model vehicles. If you know any then post them here and if you need to find any, try your first search here.
Forum rules
This section is for posting helpful Tips and Tricks only. Questions need to be posted within general questions section viewforum.php?f=14
Post Reply
User avatar
Battlechip
Recruit
Posts: 27
Joined: Sat Oct 06, 2012 7:03 am
Location: Perth Western Australia

Simple Brass Machinegun

Post by Battlechip »

Gday Fellas, I didnt see the point of the original machinegun and ive got some of this brass tubing around,so I just knocked this up in front of the TV and it only took about 35mins.Ive used 3.15mm and 4mm tube (not to scale) I used a fine drill and pencil file,and flanged the muzzle by placing a small length onto a countersunk 3mm bolt and backing a nut upto it.
Original gun.jpg
Original gun.jpg (42.6 KiB) Viewed 1406 times
Brass Machinegun.jpg
Brass Machinegun.jpg (45.79 KiB) Viewed 1406 times
Brass Machinegun2.jpg
Brass Machinegun2.jpg (47.51 KiB) Viewed 1406 times
You can get much farther with a kind word and a gun, than you can with just a kind word-Al Capone
Top
streetfighterjeff
Sergeant
Posts: 516
Joined: Sun Dec 04, 2011 10:05 am
Location: near whitby, north yorkshire

Re: Simple Brass Machinegun

Post by streetfighterjeff »

that looks fantastic. take it you drilled the bigger bore and then slid over the small bore. what sixe drill did you use? jeff
only here for a good time, not a long time
HL King Tiger
Torro Tiger I
Top
User avatar
Battlechip
Recruit
Posts: 27
Joined: Sat Oct 06, 2012 7:03 am
Location: Perth Western Australia

Re: Simple Brass Machinegun

Post by Battlechip »

Hi Jeff, I used a 1.5mm drill bit and then used the pencil file to get the holes more accurate coz my drilling wasn't that good. Cheers
You can get much farther with a kind word and a gun, than you can with just a kind word-Al Capone
Top
User avatar
Battlechip
Recruit
Posts: 27
Joined: Sat Oct 06, 2012 7:03 am
Location: Perth Western Australia

Re: Simple Brass Machinegun

Post by Battlechip »

Hi, I decided to put the led in coz it fits
MG with LED.jpg
MG with LED.jpg (60.45 KiB) Viewed 1314 times
You can get much farther with a kind word and a gun, than you can with just a kind word-Al Capone
Top
User avatar
Dietrich
Staff Sergeant
Posts: 973
Joined: Thu Aug 13, 2009 10:29 am
Location: England and Aquitaine,France

Re: Simple Brass Machinegun

Post by Dietrich »

That is an incredible piece of work considering that the MG is so small 8O
Really well done..Its almost a pity to have painted it..
Alb.
Never Forget......
   The Propaganda of the Victors....... becomes the History of the Vanquished
Top
Post Reply

Return to “Tips and Tricks”