Tiger 1 turret problem
Forum rules
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
Tiger 1 turret problem
I am having a problem with my problem is with a Taiger Tiger 1 turret. The turret rotates to the right to the 3 o'clock position and stops/jerks. I have to move it by hand a little to get it to return to the front. It moves left to the 7 o'clock position and goes the same thing. I have changed the turret ring as well as the motor assembly with no change. It appears that the ring does not engage in the motor gears at the positions I mentioned. Any help on solving this would be appreciated.
Thanks,
Jack
Thanks,
Jack
Taigen Late Tiger 1 full metal/ Clark TK22, flash/servo recoil
Taigen Early Tiger 1 full metal/El Mod Pro
Mattoro Jagdtiger with 2.4 ghz Taigen radio
Watterson/HL Sherman metal gears/tracks
Taigen metal StugIII
Heng Long Panther G IR with metal upgrades
Taigen Early Tiger 1 full metal/El Mod Pro
Mattoro Jagdtiger with 2.4 ghz Taigen radio
Watterson/HL Sherman metal gears/tracks
Taigen metal StugIII
Heng Long Panther G IR with metal upgrades
- blimp
- Sergeant
- Posts: 727
- Joined: Sat Dec 11, 2010 12:29 am
- Location: Watford , NW Londonistan . U.K.
Re: Tiger 1 turret problem
That sounds like too much sideplay , you can glue some plastic strips in each side of the hole to eliminate the worst of the slop - but check that the gear can still rotate easily .
to the bouncy room ! Yay !
Re: Tiger 1 turret problem
Thanks, I'll try that.
Taigen Late Tiger 1 full metal/ Clark TK22, flash/servo recoil
Taigen Early Tiger 1 full metal/El Mod Pro
Mattoro Jagdtiger with 2.4 ghz Taigen radio
Watterson/HL Sherman metal gears/tracks
Taigen metal StugIII
Heng Long Panther G IR with metal upgrades
Taigen Early Tiger 1 full metal/El Mod Pro
Mattoro Jagdtiger with 2.4 ghz Taigen radio
Watterson/HL Sherman metal gears/tracks
Taigen metal StugIII
Heng Long Panther G IR with metal upgrades
Re: Tiger 1 turret problem
Daft question but is the turret ring on upside down? I just ask because I've done it and it allows excessive slop like Blimp mentions.
Ian.
Ian.
www.mad-tanks.weebly.com
www.rctankelectronics.com
www.rc-truck.weebly.com
www.rc-boat.weebly.com
www.rctankelectronics.com
www.rc-truck.weebly.com
www.rc-boat.weebly.com
- blimp
- Sergeant
- Posts: 727
- Joined: Sat Dec 11, 2010 12:29 am
- Location: Watford , NW Londonistan . U.K.
Re: Tiger 1 turret problem
It does seem strange , I know the HL turret is a poor fit anyway , but is the taigen turret/hull so different that it allow the gear teeth to skip ? very odd . ( Maybe the gear ring is getting squeezed out of round by the mounting pillars ?)
to the bouncy room ! Yay !
Re: Tiger 1 turret problem
The ring is on correctly, I replaced the original with another ring and it still is stopping at 3 and 9 o;clock positions. It's going to have to wait for a week as I left today for vacation! Thanks for the assistance.
Jack
Jack
Taigen Late Tiger 1 full metal/ Clark TK22, flash/servo recoil
Taigen Early Tiger 1 full metal/El Mod Pro
Mattoro Jagdtiger with 2.4 ghz Taigen radio
Watterson/HL Sherman metal gears/tracks
Taigen metal StugIII
Heng Long Panther G IR with metal upgrades
Taigen Early Tiger 1 full metal/El Mod Pro
Mattoro Jagdtiger with 2.4 ghz Taigen radio
Watterson/HL Sherman metal gears/tracks
Taigen metal StugIII
Heng Long Panther G IR with metal upgrades
Re: Tiger 1 turret problem
hi old chap wot wot
its worth a try ?slacken your moter a little ,make shure the ring sits properly on the stubs nothing catching try the elevation unit is not fouling i hav encountered this in the past .wot wot .
its worth a try ?slacken your moter a little ,make shure the ring sits properly on the stubs nothing catching try the elevation unit is not fouling i hav encountered this in the past .wot wot .
Re: Tiger 1 turret problem
Thanks, I'll check it out when I return from vacation.
Taigen Late Tiger 1 full metal/ Clark TK22, flash/servo recoil
Taigen Early Tiger 1 full metal/El Mod Pro
Mattoro Jagdtiger with 2.4 ghz Taigen radio
Watterson/HL Sherman metal gears/tracks
Taigen metal StugIII
Heng Long Panther G IR with metal upgrades
Taigen Early Tiger 1 full metal/El Mod Pro
Mattoro Jagdtiger with 2.4 ghz Taigen radio
Watterson/HL Sherman metal gears/tracks
Taigen metal StugIII
Heng Long Panther G IR with metal upgrades
- lister fiend
- Sergeant
- Posts: 565
- Joined: Mon Sep 10, 2012 3:38 pm
- Location: ashvale, hampshire
Re: Tiger 1 turret problem
another silly idea but have you tried it with the upper hull off so you can see
what it's doing?
what it's doing?
Re: Tiger 1 turret problem
yes, when the turret gets to 3 and 9 o'clock, it does not mess with the gears. there is way too much play in the turret/hull top. The amount of play is quite a bit more than in my other Tiger 1 with an Asiatam metal turret/hull.
Taigen Late Tiger 1 full metal/ Clark TK22, flash/servo recoil
Taigen Early Tiger 1 full metal/El Mod Pro
Mattoro Jagdtiger with 2.4 ghz Taigen radio
Watterson/HL Sherman metal gears/tracks
Taigen metal StugIII
Heng Long Panther G IR with metal upgrades
Taigen Early Tiger 1 full metal/El Mod Pro
Mattoro Jagdtiger with 2.4 ghz Taigen radio
Watterson/HL Sherman metal gears/tracks
Taigen metal StugIII
Heng Long Panther G IR with metal upgrades