Tiger 1 turret problem

If you have a tank query and you can't find the answer anywhere else, post here. (TIP - Check for answers in FAQ, use the 'search' facility or even check this board before posting here).
Forum rules
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
Post Reply
User avatar
panzernut
Private
Posts: 73
Joined: Sat Feb 11, 2012 12:47 am
Location: Mansfield, Ohio

Tiger 1 turret problem

Post by panzernut »

I am having a problem with my problem is with a Taiger Tiger 1 turret. The turret rotates to the right to the 3 o'clock position and stops/jerks. I have to move it by hand a little to get it to return to the front. It moves left to the 7 o'clock position and goes the same thing. I have changed the turret ring as well as the motor assembly with no change. It appears that the ring does not engage in the motor gears at the positions I mentioned. Any help on solving this would be appreciated.

Thanks,

Jack
Taigen Late Tiger 1 full metal/ Clark TK22, flash/servo recoil
Taigen Early Tiger 1 full metal/El Mod Pro
Mattoro Jagdtiger with 2.4 ghz Taigen radio
Watterson/HL Sherman metal gears/tracks
Taigen metal StugIII
Heng Long Panther G IR with metal upgrades
User avatar
blimp
Sergeant
Posts: 727
Joined: Sat Dec 11, 2010 12:29 am
Location: Watford , NW Londonistan . U.K.

Re: Tiger 1 turret problem

Post by blimp »

That sounds like too much sideplay , you can glue some plastic strips in each side of the hole to eliminate the worst of the slop - but check that the gear can still rotate easily .
to the bouncy room ! Yay !
User avatar
panzernut
Private
Posts: 73
Joined: Sat Feb 11, 2012 12:47 am
Location: Mansfield, Ohio

Re: Tiger 1 turret problem

Post by panzernut »

Thanks, I'll try that.
Taigen Late Tiger 1 full metal/ Clark TK22, flash/servo recoil
Taigen Early Tiger 1 full metal/El Mod Pro
Mattoro Jagdtiger with 2.4 ghz Taigen radio
Watterson/HL Sherman metal gears/tracks
Taigen metal StugIII
Heng Long Panther G IR with metal upgrades
User avatar
Tankbear
Lieutenant
Posts: 3001
Joined: Sun May 22, 2011 12:00 pm
Contact:

Re: Tiger 1 turret problem

Post by Tankbear »

Daft question but is the turret ring on upside down? I just ask because I've done it and it allows excessive slop like Blimp mentions.

Ian.
www.mad-tanks.weebly.com
www.rctankelectronics.com
www.rc-truck.weebly.com
www.rc-boat.weebly.com
User avatar
blimp
Sergeant
Posts: 727
Joined: Sat Dec 11, 2010 12:29 am
Location: Watford , NW Londonistan . U.K.

Re: Tiger 1 turret problem

Post by blimp »

It does seem strange , I know the HL turret is a poor fit anyway , but is the taigen turret/hull so different that it allow the gear teeth to skip ? very odd . ( Maybe the gear ring is getting squeezed out of round by the mounting pillars ?)
to the bouncy room ! Yay !
User avatar
panzernut
Private
Posts: 73
Joined: Sat Feb 11, 2012 12:47 am
Location: Mansfield, Ohio

Re: Tiger 1 turret problem

Post by panzernut »

The ring is on correctly, I replaced the original with another ring and it still is stopping at 3 and 9 o;clock positions. It's going to have to wait for a week as I left today for vacation! Thanks for the assistance.

Jack
Taigen Late Tiger 1 full metal/ Clark TK22, flash/servo recoil
Taigen Early Tiger 1 full metal/El Mod Pro
Mattoro Jagdtiger with 2.4 ghz Taigen radio
Watterson/HL Sherman metal gears/tracks
Taigen metal StugIII
Heng Long Panther G IR with metal upgrades
cannedheat

Re: Tiger 1 turret problem

Post by cannedheat »

hi old chap wot wot
its worth a try ?slacken your moter a little ,make shure the ring sits properly on the stubs nothing catching try the elevation unit is not fouling i hav encountered this in the past .wot wot .
User avatar
panzernut
Private
Posts: 73
Joined: Sat Feb 11, 2012 12:47 am
Location: Mansfield, Ohio

Re: Tiger 1 turret problem

Post by panzernut »

Thanks, I'll check it out when I return from vacation.
Taigen Late Tiger 1 full metal/ Clark TK22, flash/servo recoil
Taigen Early Tiger 1 full metal/El Mod Pro
Mattoro Jagdtiger with 2.4 ghz Taigen radio
Watterson/HL Sherman metal gears/tracks
Taigen metal StugIII
Heng Long Panther G IR with metal upgrades
User avatar
lister fiend
Sergeant
Posts: 565
Joined: Mon Sep 10, 2012 3:38 pm
Location: ashvale, hampshire

Re: Tiger 1 turret problem

Post by lister fiend »

another silly idea but have you tried it with the upper hull off so you can see
what it's doing?
User avatar
panzernut
Private
Posts: 73
Joined: Sat Feb 11, 2012 12:47 am
Location: Mansfield, Ohio

Re: Tiger 1 turret problem

Post by panzernut »

yes, when the turret gets to 3 and 9 o'clock, it does not mess with the gears. there is way too much play in the turret/hull top. The amount of play is quite a bit more than in my other Tiger 1 with an Asiatam metal turret/hull.
Taigen Late Tiger 1 full metal/ Clark TK22, flash/servo recoil
Taigen Early Tiger 1 full metal/El Mod Pro
Mattoro Jagdtiger with 2.4 ghz Taigen radio
Watterson/HL Sherman metal gears/tracks
Taigen metal StugIII
Heng Long Panther G IR with metal upgrades
Post Reply

Return to “General Questions”