im planning on converting my wsn t-34 to heng long internals the lower hull is easy(just making everthing fit) but i need some help with the turret internals as there are a LOT wires in here and everthing seems to be connected to everything else
i want to:
keep the recoil unit if possible
keep the gun flash led
keep the elevation motor
ditch the wsn ir and flash bulbs
add hl ir if possible
what do i cut and what do i keep?
T-34 TO HL HELP
-
- Lance Corporal
- Posts: 178
- Joined: Thu Feb 11, 2010 11:05 pm
T-34 TO HL HELP
- Attachments
-
- DSC02150.JPG (144.82 KiB) Viewed 402 times
-
- DSC02149.JPG (146.63 KiB) Viewed 402 times
- Andy in Cheltenham
- Corporal
- Posts: 427
- Joined: Mon Sep 21, 2009 12:54 pm
- Location: Tewkesbury
Re: T-34 TO HL HELP
Hi
I'd be inclined to get some small cable ties and make groups of wires and mark each set as to where it came from, use masking tape to write on and wrap it round each group like a flag. I must admit it looks like a plate of Spagboll.

I'd be inclined to get some small cable ties and make groups of wires and mark each set as to where it came from, use masking tape to write on and wrap it round each group like a flag. I must admit it looks like a plate of Spagboll.

-
- Lance Corporal
- Posts: 152
- Joined: Thu Oct 29, 2009 6:11 am
- Location: Lord Howe Island, Australia
Re: T-34 TO HL HELP
Took a bit of searching but here is a great conversion guide
from the Hobby Havoc forum, good luck!
http://members.iinet.net.au/~wackywheelz/t34/" onclick="window.open(this.href);return false;
from the Hobby Havoc forum, good luck!
http://members.iinet.net.au/~wackywheelz/t34/" onclick="window.open(this.href);return false;