matorro king tiger

[raven]

thanks xrad i have a tiger gearbox somewhere also anybody have small sheet of aluminium 2mm thick x 100mmx120mm as i cant get anything over here

chris

[tankman]

Hi Raven I just might have some of that. At the mo it's in the boot of the car so I will have to wait for my dear wife to get back and I will measure up and we can go from there. I used it to make a hull floor and mount my KT gearboxes to. All the best for now
Alan

[raven]

thanks alan its for mounting gearboxes in KT, also have checked tiger 1 gearbox shaft is no longer than stug ones and now my bloody dremel has packed up my new year hasnt started very well

chris

[xrad]

The unfortunate challenges of the hobby, one thing leads to another ...etc.... It is the fact that you can surmount these little battles that you take out into the real world.

Maybe someone here has some tips on alignment of the motors and tracks for you...

[tankman]

Hi Raven I do have some alloy sheet, it's 1.2mm thick and I can cut it to the size you want. I have been down the Matorro KT upgrade route and it's hard work. I ended up getting a Tamiya hull off ebay and fitting the KT hull to that. I do have 2 spare Matorro drive sprockets as well as a barrel and mantlet off a Tamiya KT if these or the alloy sheet are of any use to you let me know. All the best for now
Alan

[raven]

hi Alan could you cut off 2 bits of 100mmx120mm thats if you can spare it and pm me how much you want + p&p also the spare tracks for the turret

thanks
chris

[tankman]

Will do Chris
Alan