general sound question hl ...wineing sound ?

[tankmad]

I had this sound the other day when I fitted A RX18 board to my jagdtiger and it was the trims that were not centred so check them hope this helps.
Stevie

[mcevoyi]

hi there the tryms .. are that the slides on the hand set

iain

[971wright]

Hi Its the FETs on the RX18 they work at a higher pitch ,There is no cure unless you change to RX14 ,it can get even worse if you fit a DBC/dbu it feeds back through the sound card,but there is a fix for this .

regards pete

[Tankie]

Yes, the trims are the sliders on the handset