About the track throwing problem of henglong Panzer3

[kanggj2]

viewtopic.php?p=363527&hilit=thrown+track#p363527
Continues from that thread.

so I researched it. As a result, it's a problem that occurs because the idle wheels are not aligned properly with the bogie wheels, and since some twisting occurs in the body material, a perfect solution is difficult, but it can be improved a lot.

Warning
I wouldn't recommend this unless you're good at DIY and MODING. There's a risk of the chassis getting damaged.


6. The idle wheel should be completely disassembled, the inner product number should be trimmed and flattened, and then reassembled

p.s I bought and installed the product in the this from toucan, but it didn't work. It's very difficult to install it because it's not a proper product. (It can't be installed in the torsion spring.) If there's someone who's worried about the same problem as me, I hope this thread will solve it.

[Herr Dr. Professor]

Your excellent drawings should help anyone who wants to make this correction to the HengLong PzKfw. 3. People should be able to find the instructions by searching under HengLong Panzer3.