HOOBEN T55 UGANDAN HILLBILLY WAGON

[HERMAN BIX]

Tyres are pretty decent so they’ll pull off with no issues.

I test-removed one & it seemed ok. Heres fingers crossed.

[HERMAN BIX]

Tiny bit of progress.
Used an old re-writable CD/DVD and cut sections to be used as periscope glass.
Has a really nice look to it when the light hits it.
3 more to do.

Also still need to do the fuel lines that join the external fuel tanks, and I might make some handles around the thing to replace the molded ones. These could be required to help secure the stowage all over it!.
There are 3D printed ones available here from BNA Modelworld but I just think they will be a bit fragile for the usual rough handling.
I might have a go at making some & see how it goes.

IMG_2796.jpeg (1.1 MiB) Viewed 998 times

IMG_2797.jpeg (1013.36 KiB) Viewed 998 times

[Herr Dr. Professor]

Ooh! Nota Bene: old CD makes for a good glass!

[HERMAN BIX]

https://www.thenewhumanitarian.org/phot ... ngo-uganda

This is the camo Im going with . The darker green I have covered, its the tan/light green I am struggling to dream up a recipe for.
The red/redbrown I can cover.
Could that odd shade be a light khaki or say add a bit of Buff to Nato Green ??
Appreciate any ideas folks

[PainlessWolf]

Herman!
It could be that the odd khaki color is due to something basic like a filter effect of having khaki buff laid next to that weird pinkish red brown. Something to test and try...
regards,
Painless

[Meter rat]

Tiny bit of progress.
Used an old re-writable CD/DVD and cut sections to be used as periscope glass.
Has a really nice look to it when the light hits it.

What’s the best way to cut the CD? Whenever I try to cut CD’s the reflective coating come off, and I just end up with a piece of clear plastic.

[HERMAN BIX]

Tiny bit of progress.
Used an old re-writable CD/DVD and cut sections to be used as periscope glass.
Has a really nice look to it when the light hits it.

What’s the best way to cut the CD? Whenever I try to cut CD’s the reflective coating come off, and I just end up with a piece of clear plastic.

For me its wipe a finger over the reflective backing with PVA glue & after it dries, cut with a really sharp pair of scissors.
Your mileage may vary but it works for me.

[Meter rat]

Tiny bit of progress.
Used an old re-writable CD/DVD and cut sections to be used as periscope glass.
Has a really nice look to it when the light hits it.

What’s the best way to cut the CD? Whenever I try to cut CD’s the reflective coating come off, and I just end up with a piece of clear plastic.

For me its wipe a finger over the reflective backing with PVA glue & after it dries, cut with a really sharp pair of scissors.
Your mileage may vary but it works for me.

Thank you. I will try your method, for the periscopes in the T72.

[Raminator]

Just a small-time arms dealer for now, got to quit my day job and move onto the big stuff! Managed to get these printed over the weekend.

IMG20230918204026.jpg (329.22 KiB) Viewed 859 times

IMG20230918205354.jpg (348.71 KiB) Viewed 859 times

Just looking at the subject pictures though, I see a lot of Type 56 AKM's (with the underfolding bayonet) so if you can figure any of those out, that would look very cool on this, and my Technical as well

Yep, it'll be easy enough to do a Type 56 and AKM from these drawings; I don't think the receiver is any different between the AK-47 and AK-74 platforms. I'll try and sort that out during the week.

[HERMAN BIX]

Good Grief Charlie Brown !!.................

Only detail missing is the wood grain
The AKM receiver is no different other than the chamber, external details differences are recognisable but subtle.