Hello from South Florida

[Saddleup]

Longtime Scale RC Enthusiast , Planes, trains, Helicopters and trucks, really like the scale side of the hobby of making the project look and act as real as possible
new to tanks just purchased a Can Shou all metal M1A2 1/16 Abrams , working on scale details and in process of attempting adding barrel smoke ,

ccrop abrams 230826.jpg (1.34 MiB) Viewed 2664 times

[Ecam]

Killer looking Abrams! Welcome aboard. That's two from Florida in two days. Did the power just come back on?

[ColemanCollector]

Welcome from Ontario, Canada! What do you feed your hockey teams down there?!

Mike.

[Saddleup]

thanks , now I have to figure how to connect the barrel smoke unit to the CS TK-16/TK-SWB board, this whole thing came without any documentation .and there is not much I can find online , I guess not many of these around .
Allan

[BarryC]

Welcome Sir!

[tankme]

Nice Abrams. Sorry, one little thing...the Vapor Compression Unit (VCU - A/C Compressor) in the rear turret bustle basket needs to be facing the other direction.

And for the TK16...here ya go:

CS TK16 English.png (746.28 KiB) Viewed 2625 times

SWB wiring, but unfortunately I don't have it in English:

Gun-Stabilizer-System-For-Scale-Model-Remote-Control-Tanks-Heng-Long-RC-Tank-Mato-RC-Tank-Upgrade-Parts-CS-TK-SWB-Control-Board-Interface-Description.jpg (121.48 KiB) Viewed 2625 times

[Ecam]

Well Saddleup, looks like you came to the right place!

[Saddleup]

Thanks for the input Derek, will remedy the VCU A/C unit and study the diagram , still would like to hear from someone that has installed the barrel smoke unit to make sure i get it right also ,Should I take this to somewhere else in the forum , if so where .
Thanks
Allan

[tankme]

Can't give any other advice than that as I don't use smokers at all. More trouble than they are worth IMO. Good luck figuring it out though.

[MrChef]

Welcome to the forum.