Heng Long 1/16 RC Tank Mother Board Main Board 7.0

[Jofaur86]

forgot video
https://m.youtube.com/watch?v=HzXH2B2iWFs

[john1970]

watch video shows you how to do jumper and why

https://www.youtube.com/watch?v=m9qCBoeBrxg

[mrmetallica]

forgot video
https://m.youtube.com/watch?v=HzXH2B2iWFs

thank you

[mrmetallica]

watch video shows you how to do jumper and why

https://www.youtube.com/watch?v=m9qCBoeBrxg

thank you

[mrmetallica]

on the diagram it is indicated: CN 6 Trigger Switch? indeed, seen that marked +/- it can be confusing ?
Look at the attached link, on the TK 6-1 for example, is the Micro switch Trigger in CN 6 well drawn? moreover, I think that if Mr. Bix indicates this manipulation? he is quite competent, not to say nonsense, I am also attaching a photo of a TK 7.0 and a video, where you can clearly see 2 wires from CN 6 to the recoil switch, ( Green arrow )
http://www.rc-panzer-shop.de/rc-tank-in ... fo-rc-tank
6469F922-A05A-442C-BEFC-0948BF6F4AC7.jpeg
Hoping to have brought some help?

thank you

[mrmetallica]

Correct Mr Jofaur, CN6 needs to have a plug with a loop in it. simply a 2-core cable out of the the plug, cut an inch long, bare the ends,join, and solder together.
Voila!!

so basicly short the 2 pins ?

yip, thats it.

thank you i wasnt doubting you its all new to me and shorting things just seems strang to me lol

[HERMAN BIX]

I get the trepidation of doing it, but rather than shorting them, think of the loop in CN6 as completing the circuit.
Stanley Legion also has a very good video of installation of a barrel smoke system that he explains the trigger loop plug in.

It will work trust me ,the voices in my head help me See dead people

[mrmetallica]

I get the trepidation of doing it, but rather than shorting them, think of the loop in CN6 as completing the circuit.
Stably Legion also has a very good video of installation of a barrel smoke system that he explains the trigger loop plug in.

It will work trust me ,the voices in my head help me See dead people

ok thank you

[fcolin821]

On the 7.0 board you do not need a jumper in cn6 you use cn5 for smoker lead and led 1 for the flash.

[MrChef]

Here is a very clear video of cannon smoke and or flash install=

https://youtu.be/MjjnKgBlDrg

Just don't buy anything from these guys their prices are stupid.