Tokyo Marui Leopard 2 A5 broken firing

[Son of a gun-ner]

You either purchase a Heng Long BB unit for ten quid off of forgebear, strip it down for that gear, or you speak to me nicely via PM and give me your postal details

[Son of a gun-ner]

Are you sure it's the same dimensions?

[snikle]

Are you sure it's the same dimensions?

With a Vernier I have

hat's 10.5 mm total length.
24 tooth is 15.5 diameter, 2.5 thick.
8 tooth is 6 diameter, 4 long plus another 4 for the smooth shaft between gears.
The bore runs smoothly on a 1.5 drill bit shank.
Looks like the two gears have different pitches, I agree one seems to be mod 5 the other Mod 6

But if I use a tap measure and old eyes I get about the same as you.

I really appreciate your help its amazing

thank you so much

Colin

[EAO]

Greetings Snikle,

I hope you find your part! But I'm sure you just discovered what makes this Forum so special! Amazing people! Never seen such a group of devoted and helpful people anywhere before! The member's here RULE! They've pulled my butt out of the fire more than once!

Cheers,
Eric.

[snikle]

Thanks I have found my part,

and I have to say that I have never ever been on a forum that was so helpful and full of such amazing people. You guys are an absolute credit to tank owners everywhere, real big thanks from me and a special call out to Son of a gun-ner

Colin

[Herr Dr. Professor]

I agree. I get useful advice and help here. For example, Rad has been a great help, making me some stencils for a special project at a reasonable price. He seems to have put a lot of time into the project, and he sent me more than just the specific stencils on the same sheet, mailed all the way to the USA in a cool black envelop with silver writing. When I get to the project, I will post a photo of the results of Rad's work.