Gig's Jagdpanzer E-100
-
43rdRecceReg
- Major
- Posts: 6295
- Joined: Fri Jul 31, 2015 11:38 am
- Location: North West Highlands, Scotland
Re: Gig's Jagdpanzer E-100
Certainly has the WOW factor
"Get your facts first, and then you can distort them as much as you please"- Mark Twain.
Re: Gig's Jagdpanzer E-100
update! after a couple of days i manage to finish the side armor pieces all 6 of them!
he WIDE
bonus size comparison with a King Tiger of the same scale.
he WIDE
bonus size comparison with a King Tiger of the same scale.
Heng Long tanks:
KV-1E
KV-2 MT-1&2
M41
King tiger
Jagdpanther
IJA Type 5 heavy 160ton (to be 3d printed)
FCM F1 (awaiting electronics)
Jagdpanzer E-100 (3D printing in progress)
KV-1E
KV-2 MT-1&2
M41
King tiger
Jagdpanther
IJA Type 5 heavy 160ton (to be 3d printed)
FCM F1 (awaiting electronics)
Jagdpanzer E-100 (3D printing in progress)
Re: Gig's Jagdpanzer E-100
printed the gun shield/,mantle
my very first fail in 5 years.
and i woke up to the gun barrel flat on the platform and some thin wirelike plastic
not to waste. the plastic wire can be used for aesthetic ropes and wires.
all isnt lost. snapped off the blob and it looked clean
printed the rest of the barrel
printed an snug inner sleeve, no glue required and just had to hammer it in.
looks pretty seamless to me
my very first fail in 5 years.
and i woke up to the gun barrel flat on the platform and some thin wirelike plastic
not to waste. the plastic wire can be used for aesthetic ropes and wires.
all isnt lost. snapped off the blob and it looked clean
printed the rest of the barrel
printed an snug inner sleeve, no glue required and just had to hammer it in.
looks pretty seamless to me
Heng Long tanks:
KV-1E
KV-2 MT-1&2
M41
King tiger
Jagdpanther
IJA Type 5 heavy 160ton (to be 3d printed)
FCM F1 (awaiting electronics)
Jagdpanzer E-100 (3D printing in progress)
KV-1E
KV-2 MT-1&2
M41
King tiger
Jagdpanther
IJA Type 5 heavy 160ton (to be 3d printed)
FCM F1 (awaiting electronics)
Jagdpanzer E-100 (3D printing in progress)
Re: Gig's Jagdpanzer E-100
gun barrel muzzle brake added
Heng Long tanks:
KV-1E
KV-2 MT-1&2
M41
King tiger
Jagdpanther
IJA Type 5 heavy 160ton (to be 3d printed)
FCM F1 (awaiting electronics)
Jagdpanzer E-100 (3D printing in progress)
KV-1E
KV-2 MT-1&2
M41
King tiger
Jagdpanther
IJA Type 5 heavy 160ton (to be 3d printed)
FCM F1 (awaiting electronics)
Jagdpanzer E-100 (3D printing in progress)
-
HERMAN BIX
- Major-General
- Posts: 11281
- Joined: Sun Jan 12, 2014 12:15 am
- Location: Gold Coast,Australia
Re: Gig's Jagdpanzer E-100
I’ve thought of a name for this when it’s finished.
Colossus
Put that in German with the right font !!
This thing is mind blowingly good mate.
Do you think it’s something you could make more of ?
Colossus
Put that in German with the right font !!
This thing is mind blowingly good mate.
Do you think it’s something you could make more of ?
HL JAGDPANTHER,HL TIGER 1,HL PzIII MUNITIONSCHLEPPER, HL KT OCTOPUS,HL PANTHER ZU-FUSS,HL STuG III,HL T34/85 BEDSPRING,
HL PZIV MALTA,MATORRO JAGDTIGER,HL F05 TIGER,TAMIYA KT,HL PANTHERDOZER,HL EARLY PANTHER G,TAIGEN/RAMINATOR T34/76,
HL AN-BRI-RAM SU-85
HL PZIV MALTA,MATORRO JAGDTIGER,HL F05 TIGER,TAMIYA KT,HL PANTHERDOZER,HL EARLY PANTHER G,TAIGEN/RAMINATOR T34/76,
HL AN-BRI-RAM SU-85
Re: Gig's Jagdpanzer E-100
continued with the gun
added a breech block from a similar gun used in the Geschutzwagen Tiger's 170mm
planning to add a travel lock for the tank
gun done
installed
added a breech block from a similar gun used in the Geschutzwagen Tiger's 170mm
planning to add a travel lock for the tank
gun done
installed
Heng Long tanks:
KV-1E
KV-2 MT-1&2
M41
King tiger
Jagdpanther
IJA Type 5 heavy 160ton (to be 3d printed)
FCM F1 (awaiting electronics)
Jagdpanzer E-100 (3D printing in progress)
KV-1E
KV-2 MT-1&2
M41
King tiger
Jagdpanther
IJA Type 5 heavy 160ton (to be 3d printed)
FCM F1 (awaiting electronics)
Jagdpanzer E-100 (3D printing in progress)
Re: Gig's Jagdpanzer E-100
Pretty cool bit of kit!!
Re: Gig's Jagdpanzer E-100
added cupola details more to come.
exhaust mufflers added
exhaust mufflers added
Heng Long tanks:
KV-1E
KV-2 MT-1&2
M41
King tiger
Jagdpanther
IJA Type 5 heavy 160ton (to be 3d printed)
FCM F1 (awaiting electronics)
Jagdpanzer E-100 (3D printing in progress)
KV-1E
KV-2 MT-1&2
M41
King tiger
Jagdpanther
IJA Type 5 heavy 160ton (to be 3d printed)
FCM F1 (awaiting electronics)
Jagdpanzer E-100 (3D printing in progress)
Re: Gig's Jagdpanzer E-100
printed the 3 piece access hatch for the back of the tank with the top ones being double linked
9 hours later after printing is done
looks quite hefty
9 hours later after printing is done
looks quite hefty
Heng Long tanks:
KV-1E
KV-2 MT-1&2
M41
King tiger
Jagdpanther
IJA Type 5 heavy 160ton (to be 3d printed)
FCM F1 (awaiting electronics)
Jagdpanzer E-100 (3D printing in progress)
KV-1E
KV-2 MT-1&2
M41
King tiger
Jagdpanther
IJA Type 5 heavy 160ton (to be 3d printed)
FCM F1 (awaiting electronics)
Jagdpanzer E-100 (3D printing in progress)
-
midlife306
- Warrant Officer 1st Class
- Posts: 2238
- Joined: Sun Aug 27, 2017 10:34 am
Re: Gig's Jagdpanzer E-100
What a thing of beauty!!!
Thanks for sharing
Cheers
Wayne
Sent from my iPhone using Tapatalk
Thanks for sharing
Cheers
Wayne
Sent from my iPhone using Tapatalk
