..and greetings to you, too, Painless!PainlessWolf wrote:Good morning again,
I'm not sure on the price of the CARSON Churchill and will go scope it out. Thanks for the heads up. If too pricey ( and it may be for an old Wolf living in the Rockies in a town trapped in the year 1919 ) I'll cross my fingers for Clark.
regards and Greetings! Roy!
Painless
Clark-Model Projected 0ne Sixteenth Cromwell Mk IV
- 43rdRecceReg
- Major
- Posts: 6295
- Joined: Fri Jul 31, 2015 11:38 am
- Location: North West Highlands, Scotland
Re: Clark-Model Projected 0ne Sixteenth Cromwell Mk IV
"Get your facts first, and then you can distort them as much as you please"- Mark Twain.
- 43rdRecceReg
- Major
- Posts: 6295
- Joined: Fri Jul 31, 2015 11:38 am
- Location: North West Highlands, Scotland
Re: Clark-Model Projected 0ne Sixteenth Cromwell Mk IV
Just to keep the pot boiling a bit, here's the most recent image of Clark's Cromwell. Once again, the image was lifted from his Facebook page.

Even though I've already built a Chris Ludwig version of this, it's getting harder to suppress that old, dread 'must have!!' urge.
.... It's beginning to manifest itself again.
.....
Is there yet a 'twelve steps' programme for tank modellers?

Even though I've already built a Chris Ludwig version of this, it's getting harder to suppress that old, dread 'must have!!' urge.
Is there yet a 'twelve steps' programme for tank modellers?
"Get your facts first, and then you can distort them as much as you please"- Mark Twain.
Re: Clark-Model Projected 0ne Sixteenth Cromwell Mk IV
They are also working on several other tanks
Full metal King tiger
BT-7
BT-42
Goliath tracked bomb
M113A1 ACAV
CM-22 Mortar carrier
CM-21A1
And from what I understand a Maus, a Comet and a Panther Ausf D in the future too
As far as i know they will all be Taigen style using both metal and plastic parts and coming pre installed with Clark boards, Flysky transmitters and TBU's

As for price they look to be similar in cost to a Taigen/Torro, their estimated price for the full metal King Tiger is $700 which is about £533 compared to the Torro king tiger which costs £514 but with all the extras this comes with i will definitely be looking into it when it is released in June-July
Full metal King tiger
BT-7
BT-42
Goliath tracked bomb
M113A1 ACAV
CM-22 Mortar carrier
CM-21A1
And from what I understand a Maus, a Comet and a Panther Ausf D in the future too
As far as i know they will all be Taigen style using both metal and plastic parts and coming pre installed with Clark boards, Flysky transmitters and TBU's

As for price they look to be similar in cost to a Taigen/Torro, their estimated price for the full metal King Tiger is $700 which is about £533 compared to the Torro king tiger which costs £514 but with all the extras this comes with i will definitely be looking into it when it is released in June-July
Panther D (WIP)
Panther A
Panther G
Jagdpanther G2
Tiger II
Pz.Kpfw. VIII Maus V2
Pz.Kpfw. II Ausf L
Sd.Kfz. 222
Sd.Kfz. 234/2
Leopard 1A1A1
Turm III
VK 45.01 (H)
Churchill VII
Chieftain Mk 3
Gepard 1A2
OF-40 Mk.2
M4A3 (76) W HVSS
Panther A
Panther G
Jagdpanther G2
Tiger II
Pz.Kpfw. VIII Maus V2
Pz.Kpfw. II Ausf L
Sd.Kfz. 222
Sd.Kfz. 234/2
Leopard 1A1A1
Turm III
VK 45.01 (H)
Churchill VII
Chieftain Mk 3
Gepard 1A2
OF-40 Mk.2
M4A3 (76) W HVSS
Re: Clark-Model Projected 0ne Sixteenth Cromwell Mk IV
Scrap the radio and Clark board, give me an empty one and I’ll take one 
- 43rdRecceReg
- Major
- Posts: 6295
- Joined: Fri Jul 31, 2015 11:38 am
- Location: North West Highlands, Scotland
Re: Clark-Model Projected 0ne Sixteenth Cromwell Mk IV
I'm with you on that one, Adam.Ad Lav wrote:Scrap the radio and Clark board, give me an empty one and I’ll take one
Even so, £500 + really isn't that bad for a British tank made to Taigen Pro spec. If they then produce the Comet as well, it will help meet (in part) the yawning gap in the market for British armour.
"Get your facts first, and then you can distort them as much as you please"- Mark Twain.
Re: Clark-Model Projected 0ne Sixteenth Cromwell Mk IV
Dear All,
Here are some update about Cromwell Project,
Art team has finished 3d modeling, CAD team will start to work on detailing and mechanical design, please refer to the album and let us know if you spot any error on it, we can correct any time before production.
-Final options for RTR are as the following
a. Flysky i6s transmitter + ia6b receiver (street price :$80 )
b. Steel gear TDGB ( triple differential gear box) ( street price:$150)
c. TK80S control board in 10-CH control mode with Cromwell sound set( street price: $150)
d. metal chassis, suspension, road wheel(with rubber), idler and sprocket,
d. plastic upper hull and small parts,
e. Pressed metal fender,
f. servo recoil and elevation,
g. full steel turret rotation unit,
h. Clear plastic coaxial and hull mount MG barrel.
-Golden sample will be finished in July for demonstration.
- Business model will be group buying and will only be produced once in limited Qty to reduce cost and we will move on to next project, the price are as the following from subcontractor
a. 100 units : $699
b. 200 units: $649
c. 300 units: $599
-Will open for ordering from May 1st to Jun 30. price will be based on the final order we get. if total order less than 100 units, we simply suspend the production and move to others, all payments will be refunded
-Start to ship from Sep. 1st.
Please feel free to contact us if any question.
Regards,
Clark
Here are some update about Cromwell Project,
Art team has finished 3d modeling, CAD team will start to work on detailing and mechanical design, please refer to the album and let us know if you spot any error on it, we can correct any time before production.
-Final options for RTR are as the following
a. Flysky i6s transmitter + ia6b receiver (street price :$80 )
b. Steel gear TDGB ( triple differential gear box) ( street price:$150)
c. TK80S control board in 10-CH control mode with Cromwell sound set( street price: $150)
d. metal chassis, suspension, road wheel(with rubber), idler and sprocket,
d. plastic upper hull and small parts,
e. Pressed metal fender,
f. servo recoil and elevation,
g. full steel turret rotation unit,
h. Clear plastic coaxial and hull mount MG barrel.
-Golden sample will be finished in July for demonstration.
- Business model will be group buying and will only be produced once in limited Qty to reduce cost and we will move on to next project, the price are as the following from subcontractor
a. 100 units : $699
b. 200 units: $649
c. 300 units: $599
-Will open for ordering from May 1st to Jun 30. price will be based on the final order we get. if total order less than 100 units, we simply suspend the production and move to others, all payments will be refunded
-Start to ship from Sep. 1st.
Please feel free to contact us if any question.
Regards,
Clark
Drammen Rock City
- AlwynTurner
- 2nd Lieutenant
- Posts: 2656
- Joined: Thu Oct 23, 2014 10:47 am
- Location: Chapel-en-le-Frith, Derbyshire
Re: Clark-Model Projected 0ne Sixteenth Cromwell Mk IV
As someone who designs and builds tanks, I must say that looks pretty awesome and the prices look really good. An amazing project and well done!
Alwyn

Alwyn
YOU'RE NEVER TOO OLD TO HAVE A HAPPY CHILDHOOD!
Saladin scratchbuild, Matilda scratchbuild, Churchill scratchbuild, Crusader scratchbuild, M10 Achiĺles scratchbuild, Universal Carrier scratchbuild
Saladin scratchbuild, Matilda scratchbuild, Churchill scratchbuild, Crusader scratchbuild, M10 Achiĺles scratchbuild, Universal Carrier scratchbuild
- Model Builder 4
- 2nd Lieutenant
- Posts: 2428
- Joined: Sun Jul 26, 2015 3:46 pm
- Location: South Wales valleys
- Contact:
Re: Clark-Model Projected 0ne Sixteenth Cromwell Mk IV
That looks great fella's
spurs me on to finish my ludwigs Cromwell kit
if I didn't already have this kit I'd be all over one of these
Cheers, Lee.
Cheers, Lee.
Me ? Addicted ? Never !! 
- 43rdRecceReg
- Major
- Posts: 6295
- Joined: Fri Jul 31, 2015 11:38 am
- Location: North West Highlands, Scotland
Re: Clark-Model Projected 0ne Sixteenth Cromwell Mk IV
It's looking dangerously attractive!
(dangerous to my bank balance
). I see it also has the hedgerow cutter fitted, like one on the Tamiya 1/35 scale model...
I think I might just have to break into my funeral fund for this one, even though I already have the Ludwig version...
So much for the Comet (just ordered!) being the last one...
Must get some counselling for these remorseless urges.

I think I might just have to break into my funeral fund for this one, even though I already have the Ludwig version...
Must get some counselling for these remorseless urges.
"Get your facts first, and then you can distort them as much as you please"- Mark Twain.
Re: Clark-Model Projected 0ne Sixteenth Cromwell Mk IV
I’ll look after the Comet for you so you can buy this!43rdRecceReg wrote:So much for the Comet (just ordered!) being the last one...

Sent from my iPad using Tapatalk