I have the Taigen V3 MFU but can it handle 4 or 8ohm ? Is the stock Taigen speaker 4 or 8ohms?
I opened the stock speakerbox on my tank but there is no writing on the speaker
![Image](http://uploads.tapatalk-cdn.com/20190122/62fefcd326f393ed388d31aca65bdb2e.jpg)
Verzonden vanaf mijn iPhone met Tapatalk
midlife306 wrote:You can actually measure the ohm value of your current speaker with a multimeter, have the speaker sat steady on a flat surface as per the pic above & measure the resistance between the two wires.
Cheers
Wayne
Thanks so much ! I was thinking last night of doing just that![]()
Is this the right setting on my multimeter?
(I put my stock Taigen speaker in a cardboard box lol (also helps with bass))
Sent from my iPhone using Tapatalk
That's where you're wrong Mr WardogWardog wrote: just going to jump in ,car speakers will take 8ohms because the sound out put or number is,in most is higher than an 8ohms hifi speaker.