TK-22 install on a pershing

[JohnWhyte]

I want to install a tk-22 in my pershing but don't what to get rid of my current handset

[MichaelC]

You can use one of these...... Closest thing to a Heng Long/Taigen handset.

https://hobbyking.com/en_us/hobby-king- ... ode-2.html

[JohnWhyte]

Just need to know if I need to change it or could I use the 1 I have as myou pershing is the test bed for mine and my dad's tank

[c.rainford73]

Just need to know if I need to change it or could I use the 1 I have as myou pershing is the test bed for mine and my dad's tank

Hi there. A Clark tk22 will only work with a hobby grade radio. The Heng Long or Taigen radio will not work.

[c.rainford73]

You need a minimum 4 ch hobby grade radio like Michael C has in the picture

[JohnWhyte]

Ok I'll order 1 when I get the board

[c.rainford73]

Also remember to get some functions like airsoft you need a Sony remote control to program the Clark board. They are inexpensive to buy. You also have to do some rewiring too. Look in the electronics section of the forum under Clark or other electronics.

I've done it before it's not too difficult. Mr Maxmekker on The forum is our resident Clark guru. If you are looking to buy one talk to him

Cheers

Carl

[JohnWhyte]

Well it doesn't matter about the airsoft parts it really there to elevate and depress the gun

[c.rainford73]

Well it doesn't matter about the airsoft parts it really there to elevate and depress the gun

So you are using it to control a servo recoil setup and elevation servo or the standard gear setup?