IBU3 config questions

[MichaelC]

Hi all,

Got myself a IBU3 thanks to a fellow tanker. Anyway, started playing with it and have couple of questions:

- Do you need to power it separately when you are configuring thru the USB port ?

- For Carson's PDSGB, I assume is the so called "clutch" setting on the config (i.e one motor out drives forward/backwards and one for L/R ?)

I have IBU2 Base and Pro but this is quite different.

MichaelC.

[Tankbear]

Yes need to power the IBU3 when connected to USB for programming.

Correct "clutch style" tick the box for DKLM gearboxes.

Manual is available here

http://www.rctankelectronics.com/upload ... ish_v1.pdf

and addendum here

http://www.rctankelectronics.com/upload ... ndum_1.pdf

[MichaelC]

Thanks Ian. Also, do I need to have a radio/receiver hook up as well if I am not doing calibration ?

[Tankbear]

If the radio is already configured to the IBU3 then no don't need it on.

Although I generally have the radio on as it allows me to test whilst I'm making the changes without having to unplug it all and test later.

Ian.