RC conversion for 1:35 scale

Feel free to discuss anything and everything to do with tanking here!
User avatar
SteelBird
Corporal
Posts: 382
Joined: Sun Nov 15, 2015 7:03 am

Re: RC conversion for 1:35 scale

Post by SteelBird »

tommyjen wrote:went today to the tamiya local distributor, a 1:35 scale rc sherman costs USD 310 ...
For me, that's way too expensive and I guess everything is made of plastic. I think you better go for Taigen tanks.
H/L Pantiger, H/L Leopard 2A6, Mato Panzer III, Hybrid Tiger 1 and some tank wreckage
tommyjen
Recruit
Posts: 8
Joined: Wed Jan 04, 2017 11:16 am

Re: RC conversion for 1:35 scale

Post by tommyjen »

Thats y i would like to build my own rc... still looking for instructions and part lists.
User avatar
AlwynTurner
2nd Lieutenant
Posts: 2654
Joined: Thu Oct 23, 2014 10:47 am
Location: Chapel-en-le-Frith, Derbyshire

Re: RC conversion for 1:35 scale

Post by AlwynTurner »

Hi Tommy, suggest you look at one of these
http://www.ebay.co.uk/itm/SGILE-1-72-Re ... Sw44BYXJdm
to get you the electronics, one of these
http://www.ebay.co.uk/itm/TAMIYA-70097- ... Dy3HQajLIg
for motors
this youtube gives some pointers
https://www.youtube.com/watch?v=7dO1PrEAp5c

That should give you a starter
Alwyn
YOU'RE NEVER TOO OLD TO HAVE A HAPPY CHILDHOOD!

Saladin scratchbuild, Matilda scratchbuild, Churchill scratchbuild, Crusader scratchbuild, M10 Achiĺles scratchbuild, Universal Carrier scratchbuild
User avatar
ausf
Lance Corporal
Posts: 245
Joined: Fri Apr 06, 2012 1:30 am
Location: New York

Re: RC conversion for 1:35 scale

Post by ausf »

I have two Tamiya 1/35 Tiger Is in the stash that I paid $75 for. I'm referring to the older, non IR, 27mhz ones.

There is no parts list to give you until you know what tank you want to convert. Space is the prime concern in 1/35 and a gear head motors you can squeeze into a Tiger won't fit in a Pz I.

Second major obstacle is the tracks. Links in 1/35 don't behave like they do in larger scales and with the size limitations come strength issues. One binding and they snap. You're best bet would be to find a kit with the rubber band tracks or the largest link available, like a T-34 or Tiger.

I'm guessing Clark didn't go ahead with the conversion kits because even as a unit, there would be considerable skill needed to install correctly and they probably don't want the headache of having to solve a bunch of issues. I have the scale 35 kit for the 1/16 Panda 35(t) and while nice, their gearboxes won't stand up and the beautiful kit tracks really aren't up to the challenge. I have a special pin drill that can be controlled down to a few revolutions so driling out the hundred plus link pins wasn't a problem for me, but the end product is not designed to move.

I'd start with choosing a kit and working out what motors you can fit and what tracks you'll use. After that, you can choose the next step, a programable Tx so you can V tail mix two escs to control. You'll need car escs so they are reversible and really small ones to boot. And a receiver and battery and that's just to go forward, reverse and turn.

If you look at my video again, you can see the Rx and battery just hanging out. And that's a sizable 1/35 box of a tank. Tamiya did the hard work by the end gearing, suspension and track links. I can barely get the basics in there and I'm not stranger to conversions.

Look at this TC, he has two servos to control the head in his chest and that's a heck of a lot easier than a 1/35 hull:

phpBB [video]


'm not trying to discourage you, just want you to be realistic. It gets very expensive by the time you start adding up all the parts, Tx/Rx, battery, servos, escs, gearboxes and then all the styrene stock and hardware and soldering supplies. It's a lot of money and work, if you add it all up, the $300 on the Tamiya may be worth it.
What, me worry?
tommyjen
Recruit
Posts: 8
Joined: Wed Jan 04, 2017 11:16 am

Re: RC conversion for 1:35 scale

Post by tommyjen »

thanks for the heads up... well said.
User avatar
Rad_Schuhart
Warrant Officer 1st Class
Posts: 2089
Joined: Tue Jan 19, 2016 9:22 am
Location: Spanish living in Graz, Austria. Heart in UK.
Contact:

Re: RC conversion for 1:35 scale

Post by Rad_Schuhart »

Ausf, I considered myself to build and to RC the Panzer 38T, but it is indeed a lot of pain and people that managed to RC it had the same problems a you. The tracks are one of the biggests problems, so that's why I have seen some people using panzer III tracks on it.

Anyway that RC conversion is way ahead of my skills, so I did not buy it. I bought a renault FT17 and some parts to make it Rcable, but I think I will build it as an static kit too.
My RC tanks website, loads of free info for everybody:
https://radindustries.wordpress.com/
User avatar
135conversion
Recruit
Posts: 1
Joined: Mon Dec 25, 2017 10:13 pm

Re: RC conversion for 1:35 scale

Post by 135conversion »

Hi all I see you were after making 1/35 rc tanks well I have converted a couple and have researched them enough to know all the tamiya kits that were originally motorised and i am more than happy to help you out I have done a tamiya panther 1/35 ausf a and a 1/35 trumpeter as90 self propeled howitzer thé as90 was not an easy conversion however but the panther was extreamly simple and I’m more than happy to show pictures and give links to parts and the best bit is the tank is only 16 pounds
Post Reply

Return to “General Discussion”