I'm getting the metal treads for my Tiger 1 as i blabbed on about at length in a previous post. I had these metal gearboxes, from ali express, got em so long ago i cant remember who made them. They would not fit in the King tiger, the only tank i had when i ordered these gearboxes, so i set them aside and just kept using the old ones.
But now that I have the tiger treads coming i wanted to upgrade to the steel gearboxes. I "borrowed" the steel shafts from my Panzer mark III, that had the metal gearbox, and that's waiting on other parts . Rather then just do a straight swap of the Mark III box into the tiger (what i should have done in the first place!) I swapped the short shafts to the new gearboxes. These gearboxes went in just fine and everything functions as it should except:
FORWARD and BACK functions on the transmitter stick are now reversed!!!

push forward to go reverse, back goes forward. Turning functions as normal. I tried the obvious, switching the motor wires pos and neg-of course that didn't work. I'm a tiny bit irate, but seriously thinking of leaving it how it is and just relearn on the Tx! Does anybody know what my options are to do about this?
Here's a picture of the gears FWIW
