Hi every body, fired up the heng long jagdpanther last night everything functioned fine then turned everything
of. This morning the tank would not start, light flashes on tank and light comes on on transmitter, checked batteries and
all are up to full strength, when tank is switched on there is a slight hiss from the speaker but when you hit the
start button it just will not start, have checked all connections in tank all seem ok any ideas?
rtr
Will not start
Forum rules
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
- PainlessWolf
- Lieutenant-Colonel
- Posts: 7668
- Joined: Sun Feb 26, 2012 9:09 pm
- Location: Southern Colorado Rocky Mountains
Re: Will not start
Good Morning,
Start button feels solid? ( good click when you press it? ) Check and make double sure that the crystals in the tank and TX are secured. If you are using a 2.4 set, make sure that the TX is binding to the tank correctly. I hope this helps.
regards,
Painless
Start button feels solid? ( good click when you press it? ) Check and make double sure that the crystals in the tank and TX are secured. If you are using a 2.4 set, make sure that the TX is binding to the tank correctly. I hope this helps.
regards,
Painless
...Here for the Dawn...
Re: Will not start
Hi Painless, yep turned out to be a crystal, put new pair in now all ok, many thanks.
rtr
rtr
- PainlessWolf
- Lieutenant-Colonel
- Posts: 7668
- Joined: Sun Feb 26, 2012 9:09 pm
- Location: Southern Colorado Rocky Mountains
Re: Will not start
rtr,
Glad to hear that all is well. Enjoy!
Regards
Painless
Glad to hear that all is well. Enjoy!
Regards
Painless
...Here for the Dawn...