Will not start

If you have a tank query and you can't find the answer anywhere else, post here. (TIP - Check for answers in FAQ, use the 'search' facility or even check this board before posting here).
Forum rules
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
Post Reply
rtr
Recruit
Posts: 28
Joined: Wed Sep 23, 2009 2:48 pm
Location: East Sussex

Will not start

Post by rtr »

Hi every body, fired up the heng long jagdpanther last night everything functioned fine then turned everything
of. This morning the tank would not start, light flashes on tank and light comes on on transmitter, checked batteries and
all are up to full strength, when tank is switched on there is a slight hiss from the speaker but when you hit the
start button it just will not start, have checked all connections in tank all seem ok any ideas?

rtr
User avatar
PainlessWolf
Lieutenant-Colonel
Posts: 7665
Joined: Sun Feb 26, 2012 9:09 pm
Location: Southern Colorado Rocky Mountains

Re: Will not start

Post by PainlessWolf »

Good Morning,
Start button feels solid? ( good click when you press it? ) Check and make double sure that the crystals in the tank and TX are secured. If you are using a 2.4 set, make sure that the TX is binding to the tank correctly. I hope this helps.
regards,
Painless
...Here for the Dawn...
rtr
Recruit
Posts: 28
Joined: Wed Sep 23, 2009 2:48 pm
Location: East Sussex

Re: Will not start

Post by rtr »

Hi Painless, yep turned out to be a crystal, put new pair in now all ok, many thanks.

rtr
User avatar
PainlessWolf
Lieutenant-Colonel
Posts: 7665
Joined: Sun Feb 26, 2012 9:09 pm
Location: Southern Colorado Rocky Mountains

Re: Will not start

Post by PainlessWolf »

rtr,
Glad to hear that all is well. Enjoy!
Regards
Painless
...Here for the Dawn...
Post Reply

Return to “General Questions”