Help! My U.S.M41A3 dosen't Work
Forum rules
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
Help! My U.S.M41A3 dosen't Work
Help! My U.S.M41A3 dosen't Work.
First the tank stopped driving then you could press the start button on the transmitter & It would start up you can here the engine sound but nothing else worked.
then all I got was the lights on the tank front & rear just flash!
I took it apart & bought a New heng long RX18 multi function box unit with leads ( cables ) Also a Heng Long 1:16 rc Tank 27mhz transmitter controller for Smoke & sound & BB
Heng Long 1/16 rc tank FM crystals 27.145 mhz-set 1 & Heng Long 1/16 rc Tank TK-YL101-3 receiver board for use with rx18mfu BN .
Put them all in the tank STILL THE SAME any ideas.
First the tank stopped driving then you could press the start button on the transmitter & It would start up you can here the engine sound but nothing else worked.
then all I got was the lights on the tank front & rear just flash!
I took it apart & bought a New heng long RX18 multi function box unit with leads ( cables ) Also a Heng Long 1:16 rc Tank 27mhz transmitter controller for Smoke & sound & BB
Heng Long 1/16 rc tank FM crystals 27.145 mhz-set 1 & Heng Long 1/16 rc Tank TK-YL101-3 receiver board for use with rx18mfu BN .
Put them all in the tank STILL THE SAME any ideas.
- lister fiend
- Sergeant
- Posts: 565
- Joined: Mon Sep 10, 2012 3:38 pm
- Location: ashvale, hampshire
Re: Help! My U.S.M41A3 dosen't Work
I'm no trying to be funny but have you tried another battery?
- PainlessWolf
- Lieutenant-Colonel
- Posts: 7663
- Joined: Sun Feb 26, 2012 9:09 pm
- Location: Southern Colorado Rocky Mountains
Re: Help! My U.S.M41A3 dosen't Work
Good Evening,
All of those symptoms do sound battery related, especially the progression in which they occurred. Good Luck!
regards,
Painless Wolf
All of those symptoms do sound battery related, especially the progression in which they occurred. Good Luck!
regards,
Painless Wolf
...Here for the Dawn...
Re: Help! My U.S.M41A3 dosen't Work
I agree sounds like the Battery
Welcome True brit
Welcome True brit
Re: Help! My U.S.M41A3 dosen't Work

Re: Help! My U.S.M41A3 dosen't Work
just a guess Truebrit.... check your hookups.. something isn't connected right... you cannot have that many new parts and still have the same problem....there's a post somewhere in the "fix your tank" category .... it has wiring and hook up diagrams... try looking for it.... If i find it first... I'll try and bring it here
- forgebear
- Warrant Officer 1st Class
- Posts: 1842
- Joined: Fri Nov 21, 2008 11:15 pm
- Location: bedford
- Contact:
Re: Help! My U.S.M41A3 dosen't Work
hi. just my 2 pennys worth here. I notice you say you have a new transmitter. I would suggest you check the crystals and make sure that the tx crystal is in the handset and the rx is in the tank. I know it sounds obvious but ihave known people get it wrong and look for a more complicated solution. also make sure the legs on the crystal are making contact with the prongs in the handset and the tank. again they often look as though they are in there but don't quite connect. try your crystal from the handset without the black clip so you can see where the legs are going. if it doesn't fire up then the next suggestion is another set of crystals that you know work. so we will go for that for the moment and see if that works? dave
Re: Help! My U.S.M41A3 dosen't Work
Thx Guys The Tank is at my caravan so its the weekend before I can try all your suggestions
Re: Help! My U.S.M41A3 dosen't Work
Sorry TrueBrit ... I couldn't find the post.... I do recommend you listening to forgebear though...because as I recall the wiring diagram post was his
Thanks Dave for fielding this with your expertise
Thanks Dave for fielding this with your expertise

- forgebear
- Warrant Officer 1st Class
- Posts: 1842
- Joined: Fri Nov 21, 2008 11:15 pm
- Location: bedford
- Contact:
Re: Help! My U.S.M41A3 dosen't Work
no problem hope we can sort it out for him dave