Help! My U.S.M41A3 dosen't Work

If you have a tank query and you can't find the answer anywhere else, post here. (TIP - Check for answers in FAQ, use the 'search' facility or even check this board before posting here).
Forum rules
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
User avatar
TrueBrit
Recruit
Posts: 13
Joined: Tue Oct 15, 2013 8:36 pm

Help! My U.S.M41A3 dosen't Work

Post by TrueBrit »

Help! My U.S.M41A3 dosen't Work.
First the tank stopped driving then you could press the start button on the transmitter & It would start up you can here the engine sound but nothing else worked.
then all I got was the lights on the tank front & rear just flash!

I took it apart & bought a New heng long RX18 multi function box unit with leads ( cables ) Also a Heng Long 1:16 rc Tank 27mhz transmitter controller for Smoke & sound & BB

Heng Long 1/16 rc tank FM crystals 27.145 mhz-set 1 & Heng Long 1/16 rc Tank TK-YL101-3 receiver board for use with rx18mfu BN .
Put them all in the tank STILL THE SAME any ideas.
User avatar
lister fiend
Sergeant
Posts: 565
Joined: Mon Sep 10, 2012 3:38 pm
Location: ashvale, hampshire

Re: Help! My U.S.M41A3 dosen't Work

Post by lister fiend »

I'm no trying to be funny but have you tried another battery?
User avatar
PainlessWolf
Lieutenant-Colonel
Posts: 7661
Joined: Sun Feb 26, 2012 9:09 pm
Location: Southern Colorado Rocky Mountains

Re: Help! My U.S.M41A3 dosen't Work

Post by PainlessWolf »

Good Evening,
All of those symptoms do sound battery related, especially the progression in which they occurred. Good Luck!
regards,
Painless Wolf
...Here for the Dawn...
ALPHA
Major-General
Posts: 10960
Joined: Thu Oct 03, 2013 1:06 am

Re: Help! My U.S.M41A3 dosen't Work

Post by ALPHA »

I agree sounds like the Battery

Welcome True brit
User avatar
TrueBrit
Recruit
Posts: 13
Joined: Tue Oct 15, 2013 8:36 pm

Re: Help! My U.S.M41A3 dosen't Work

Post by TrueBrit »

:'( I put a new battery in as well still the same !
ALPHA
Major-General
Posts: 10960
Joined: Thu Oct 03, 2013 1:06 am

Re: Help! My U.S.M41A3 dosen't Work

Post by ALPHA »

just a guess Truebrit.... check your hookups.. something isn't connected right... you cannot have that many new parts and still have the same problem....there's a post somewhere in the "fix your tank" category .... it has wiring and hook up diagrams... try looking for it.... If i find it first... I'll try and bring it here
User avatar
forgebear
Warrant Officer 1st Class
Posts: 1842
Joined: Fri Nov 21, 2008 11:15 pm
Location: bedford
Contact:

Re: Help! My U.S.M41A3 dosen't Work

Post by forgebear »

hi. just my 2 pennys worth here. I notice you say you have a new transmitter. I would suggest you check the crystals and make sure that the tx crystal is in the handset and the rx is in the tank. I know it sounds obvious but ihave known people get it wrong and look for a more complicated solution. also make sure the legs on the crystal are making contact with the prongs in the handset and the tank. again they often look as though they are in there but don't quite connect. try your crystal from the handset without the black clip so you can see where the legs are going. if it doesn't fire up then the next suggestion is another set of crystals that you know work. so we will go for that for the moment and see if that works? dave
User avatar
TrueBrit
Recruit
Posts: 13
Joined: Tue Oct 15, 2013 8:36 pm

Re: Help! My U.S.M41A3 dosen't Work

Post by TrueBrit »

Thx Guys The Tank is at my caravan so its the weekend before I can try all your suggestions
ALPHA
Major-General
Posts: 10960
Joined: Thu Oct 03, 2013 1:06 am

Re: Help! My U.S.M41A3 dosen't Work

Post by ALPHA »

Sorry TrueBrit ... I couldn't find the post.... I do recommend you listening to forgebear though...because as I recall the wiring diagram post was his

Thanks Dave for fielding this with your expertise :thumbup:
User avatar
forgebear
Warrant Officer 1st Class
Posts: 1842
Joined: Fri Nov 21, 2008 11:15 pm
Location: bedford
Contact:

Re: Help! My U.S.M41A3 dosen't Work

Post by forgebear »

no problem hope we can sort it out for him dave
Post Reply

Return to “General Questions”