RC Tank Warfare community hobby forum

I bought a Turnigy 9x 2.4GHz transmitter and am having some trouble getting it to work with my Tamiya Sherman M4A3E8 conversion. Does anyone have any suggestions on how to use this transmitter with the Tamiya tanks?

Hey Mate, I have 2 tamiya tanks which I run off my turnigy and the guys in my club all run turnigy.
Whats it doing ??

Cheers Ken

I just can't set the DMD with the Turnigy rx conected. The lights on DMD still flashing in orange. When i change to a Futaba Rx/Tx the DMD works fine. But my Futaba has only 4 channels and i want to add more actions to this tank.

Plug a servo into the Turnigy Rx and see if it has bound with the TX. If you can't control it you have a binding problem and you'll need to bind the tx and rx again

Jd

jdflute wrote:Plug a servo into the Turnigy Rx and see if it has bound with the TX. If you can't control it you have a binding problem and you'll need to bind the tx and rx again

Jd

I agree check that it has been bound, when setting the dmd up the stick controlling the gun up and down movement dont move fully up or fully down otherwise you wont be able to get the gun to fire or the machine to fire also I have the main gun fire set up too the spring toggle switch on the back righthand corner..

Let me know if you need anymore help and I could possibly email you the video set up of it...

Cheers Ken

I would be very grateful if you could send the video. I have little time during the week to research the solution to this problem.

Ok mate let me see what I can do in the next couple of days........

Cheers Ken

Here is a link to the stock manual, it may not have the same manufacturer's name but that doesn't matter
http://9xforums.com/forum/download/file ... 2d0ac7b535
Jd

Thank you. I´ll try it this weekend.

Sorry for the late reply havent not had a chance due to my work to try and make a vid are you still having trouble