i guess it is an "age thingy"---
anyways i have some problems as below
#1. this is a hl tiger 1---as the turret rotates clockwise and counter clockwise it sticks against something at the 90 degree position --once past this point it goes ok---how do i separate the turret from the main panzer body--there must be some simple procedure--and "yes" i do have a fries crane to lift the turret
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!#2. this is tiger 1 tamiya full option kit that i bought about two years ago--i could not fault the kit at all---the transmitter and receiver i bought as a package--it is an "acoms technplus 4fm"--the panzer is now fully assembled with the turret just sitting on the hull--all electrical work is complete--the test procedure during construction was good--i have powered up the tx--and then the rx in the panzer--i can hear the speaker humming-and hear it start up and shut down--and i can see the operation indication light flashing green on the mfu ---plus the light for cn7 also on the mfu is glowing----after that nothing at all ---at first i thought the batteries were flat so they have been charged up---no change---i have a large model area in my workshop so conditions are good and having worked in engineering and built a lot of models i work to a good standard--check and treble check everything etc etc ----i suspect this is "operateing ignorance"--as this is my first panzer rc build--all help appreciated--best wishes--hue city
