Asiatam proportional smoke unit

[thwobble]

Hi,
Just bought an Asiatam proportional smoke unit for my son's HL Tiger 1 and I need to know where the extra wires go. If anyone can send me a diagram or photo, I'd be most grateful.
Thanks!
thwobble

[Tankbear]

Need connecting to the motors so when motors turn the smoker pumps more.

Not seen the asiatam unit but guess either 2 or 4 wires. If 2 connect one to each motor positive lead.

Hope that helps.

[thwobble]

Hi Tankbear - Thanks for the reply. There's the RX connector and 4 more wires (2 red, 2 black), so I guess there's a + and - for each motor?

[Tankbear]

Yeah connect all four to the motors. Shouldn't matter which wire goes to which motor as it is only picking up the voltage to increase the smoker pump speed.

[thwobble]

Thanks, I'll do that and hope I don't blow anything up...

[jonger]

I have just done the same, bought some proportional smoke units to upgrade my fixed speed ones and found a diagram on another thread showing the red (+ve) wires going to the outer connectors and the black (-ve) wires going to the middle ones.
Hope that helps.

[thwobble]

Sounds good to me - thanks everyone for all the help!

[blimp]

proportional smoker - additional wires

[thwobble]

That's excellent - thanks very much!