tiger 1/wsn t34

[painkiller]

hi guys i have a wsn t34 converted to heng long rx18 electronics,light flashes in the gun and it recoils when fired,does anyone have a wiring diagram that would tell me how and what i would need to convert it to IR,i am also building a heng long tiger one from my many spares,and rather than firing bb pellets i would like to convert this to IR with a recoiling main gun,so a diagram for that would also be helpfull.thankyou

[Tankbear]

I don't have IR version but I thought it just plugged into the RX18 board in the 5 pin port adjacent the power port.

As for the recoil in the tiger, there is a heng long part which replaces the airsoft bit, think uses same wiring as the airsoft. Only thing I don't know is if there is a heng long recoil barrel available (sure must be if there make the recoil unit, but I haven't come across it). There is plenty of aftermarket metal barrels and matlets available, plus with some work Asiatam or Tamiya recol units can be fitted.

Maybe somebody else can explain more as I haven't done the conversion myself but thinkng about it.