Page 1 of 1
torro / trumpeter tiger 1 wheels help
Posted: Thu Apr 15, 2010 1:27 pm
by mcevoyi
hi all
i have a torro/trumpeter tiger 1 ..
and i cannot see how to remove the road wheels ??
any one done it ?
iain
Re: torro / trumpeter tiger 1 wheels help
Posted: Thu Apr 15, 2010 3:07 pm
by BREL
Iain do you have a picture of the wheel from both sides, it may help jog someones memory on here
Re: torro / trumpeter tiger 1 wheels help
Posted: Thu Apr 15, 2010 4:04 pm
by mcevoyi
hi there BREl
just looking at the tiger i cannot even figure out hoe to get the hull apart !
any help would be great ... as one side of the running gear is not working
iain
Re: torro / trumpeter tiger 1 wheels help
Posted: Thu Apr 15, 2010 6:58 pm
by Saxondog
Iain,Oz sent me a set of Tiger wheels from his WSN Tiger,the axle seems to attach to the control arms like the Asiatam axles.Their should be a set screw in the control arms that holds the axle into the arm.Also the two wheels close together seem to be attached with screws.Here are some pictures,I must admit I have been unable to separate the wheels,from the axles,Sax
Re: torro / trumpeter tiger 1 wheels help
Posted: Thu Apr 15, 2010 8:18 pm
by mcevoyi
thanks sax for the pics
they sort of help ... i want to do a very late tiger 1 .... and still kind of figureing out how to do it >
iain
Re: torro / trumpeter tiger 1 wheels help
Posted: Thu Apr 15, 2010 8:53 pm
by Saxondog
Hello Iain,I'm still trying to separate these wheels but so far no go.If you figure out how to do that please share.Sax
Re: torro / trumpeter tiger 1 wheels help
Posted: Thu Apr 15, 2010 8:56 pm
by mcevoyi
sure will sax ...
now messing with a tam king tiger