torro / trumpeter tiger 1 wheels help

mcevoyi · Post by **mcevoyi** » Thu Apr 15, 2010 1:27 pm

hi all

i have a torro/trumpeter tiger 1 ..

and i cannot see how to remove the road wheels ??

any one done it ?

iain

BREL · Post by **BREL** » Thu Apr 15, 2010 3:07 pm

Iain do you have a picture of the wheel from both sides, it may help jog someones memory on here

mcevoyi · Post by **mcevoyi** » Thu Apr 15, 2010 4:04 pm

hi there BREl

just looking at the tiger i cannot even figure out hoe to get the hull apart !

any help would be great ... as one side of the running gear is not working

iain

Saxondog · Post by **Saxondog** » Thu Apr 15, 2010 6:58 pm

Iain,Oz sent me a set of Tiger wheels from his WSN Tiger,the axle seems to attach to the control arms like the Asiatam axles.Their should be a set screw in the control arms that holds the axle into the arm.Also the two wheels close together seem to be attached with screws.Here are some pictures,I must admit I have been unable to separate the wheels,from the axles,Sax