Page 1 of 3

matorro king tiger

Posted: Fri Dec 25, 2009 8:25 pm
by raven
tried the matorro KT today i think its terrible and the sound is awful plus not worth the money h/l are a lot better and cheaper am going to strip everything out and put h/l electrics in shame really nice looking tank

chris

Re: matorro king tiger

Posted: Fri Dec 25, 2009 10:53 pm
by Woz
Thats what most people do.

Re: matorro king tiger

Posted: Sat Dec 26, 2009 1:42 pm
by raven
yea i know do i have to replace all the electrics and what type of gearbox will fit the KT would a h/l tiger 1 gearbox fit
i have stripped most of the tank found some bits broken off the plastic not very strong so some repair work to do

chris

Re: matorro king tiger

Posted: Sat Dec 26, 2009 3:37 pm
by fv432
Hi Chris

for the gearboxes have a look here http://rctankwarfare.co.cc/forums/viewt ... f=1&t=4079
your basic smoke and sound upgrade package should sort you out new board(rx14/rx18) and controller :thumbup:

Re: matorro king tiger

Posted: Sat Dec 26, 2009 6:25 pm
by jrc
hi Chris

this is how I did my KT with a set of standard HL metal gearboxes, cheap, quick and effective.

ross

http://rctankwarfare.co.cc/forums/viewt ... 158#p34221

Re: matorro king tiger

Posted: Sat Dec 26, 2009 9:39 pm
by raven
thanks guys i will need plenty of help with the electrics when i get started as im quite usless at it and just one other thing is the matorro controller same as the h/l one

thanks
chris

Re: matorro king tiger

Posted: Sat Dec 26, 2009 11:20 pm
by fv432
The answer is no im afraid chris have tried it :crazy:

the pots are all round the wrong way but if you fancy converting it to h/long tx board it isnt to difficult but you will need to re-wire the potentiometers in the controller :thumbup:

Re: matorro king tiger

Posted: Sun Dec 27, 2009 12:04 pm
by raven
thanks fv432 i could use one of the other h/l controllers i have as i have 5 h/l tanks and how do i get the front drive sprockets off and cant seem to remove hubcaps, another problem is the gun barrel is glued to the mantlet

chris

Re: matorro king tiger

Posted: Sun Dec 27, 2009 12:14 pm
by fv432
thats what i would do chris just swap out the crystals on the controller :thumbup:

the front drive sprockets inner hub cover pops off and is a real b***h to get of so patience and effort should see you ok it needs quite a bit of brute force without trying to damage it

Re: matorro king tiger

Posted: Sun Dec 27, 2009 1:06 pm
by raven
thanks again fv432 for your help as you say a bugger to get off did it without any damage

thanks
chris