Page 1 of 1
Recoil barrel
Posted: Mon Dec 22, 2025 4:09 pm
by Jofaur86

Hello, I have a question please, regarding the barrel movement on a Jagdtiger? How much does it recoil when firing (1/16 scale)? Is this to adjust the barrel length for the recoil mechanism? Because it's been cut twice, twice too short

Thank you in advance and Merry Christmas.
Re: Recoil barrel
Posted: Mon Dec 22, 2025 4:28 pm
by MrChef
Jofaur86 wrote: ↑Mon Dec 22, 2025 4:09 pm

Hello, I have a question please, regarding the barrel movement on a Jagdtiger? How much does it recoil when firing (1/16 scale)? Is this to adjust the barrel length for the recoil mechanism? Because it's been cut twice, twice too short

Thank you in advance and Merry Christmas.
Talk to Casey "Shameless,,,", he has 3 Jagdtigers IIRC. I'm sure he could share some information. And he's a good guy I know from the Facebook RC tank groups-
viewtopic.php?t=38253
Re: Recoil barrel
Posted: Mon Dec 22, 2025 6:10 pm
by Panzermechaniker
Mine recoils approximately 10mm. But that's just me using a ruler and my eyes so not totally accurate to the mm
Re: Recoil barrel
Posted: Mon Dec 22, 2025 11:04 pm
by Jofaur86
MrChef wrote: ↑Mon Dec 22, 2025 4:28 pm
Jofaur86 wrote: ↑Mon Dec 22, 2025 4:09 pm

Hello, I have a question please, regarding the barrel movement on a Jagdtiger? How much does it recoil when firing (1/16 scale)? Is this to adjust the barrel length for the recoil mechanism? Because it's been cut twice, twice too short

Thank you in advance and Merry Christmas.
Talk to Casey "Shameless,,,", he has 3 Jagdtigers IIRC. I'm sure he could share some information. And he's a good guy I know from the Facebook RC tank groups-
viewtopic.php?t=38253
Thank you for the reply, I sent a PM, waiting for a response.
Re: Recoil barrel
Posted: Mon Dec 22, 2025 11:07 pm
by Jofaur86
Thanks also, 10 mm seems low to me, but possible, should have been checked before disassembly Asiatam?
Re: Recoil barrel
Posted: Tue Dec 23, 2025 2:39 am
by HERMAN BIX
According to sources on the gun, 32.5mm of recoil is the 16th scale recoil travel required.
The hydro-pneumatic system was able to be varied on the towed weapon to allow for different ammo, but the gun fitted to the JT was apparently set to recoil 520mm .
When I saw 331 in Aberdeen Proving Ground the barrel was(and is) in full battery. The entire thing was rammed back into the cradle when the recouperators were drained & the gun fired. Some plastic Models have been miss represented due to this , the Mattoro version also suffered the error.
Re: Recoil barrel
Posted: Tue Dec 23, 2025 10:30 am
by Jofaur86

Hello and thank you Herman, late last night I searched and found... a recoil of 900 mm at 1:1 scale. So a quick calculation: 900 divided by 1/16 gives the length you mentioned, even though it seemed enormous to me. Wishing you a Merry Christmas.