Customer has had a few probs with his tank
When the jagd is moving it constantly fires with the barrel recoiling. how do we stop this.
Weve tried battery, crystals etc
Jagdpanther problem
-
- Corporal
- Posts: 409
- Joined: Fri Sep 19, 2008 3:22 pm
- Location: Kinver
- Contact:
-
- 2nd Lieutenant
- Posts: 2294
- Joined: Fri Sep 26, 2008 11:24 pm
- Location: Now Living in Cyprus .... Modellers desart ...
Re: Jagdpanther problem
hi there MM
stuiped questin time .. with out takeing the jp apart ... is there a way i can tell if the jp has the recoil system ?
stuiped questin time .. with out takeing the jp apart ... is there a way i can tell if the jp has the recoil system ?
Re: Jagdpanther problem
Check if the barrel is recoiling to it's full extention. If the barrel is stopped from returning to it's full recoil possition it will keep trying to fire.
- wibblywobbly
- Major
- Posts: 6396
- Joined: Fri Oct 17, 2008 9:30 am
- Location: South Wales Valley
- Contact:
Re: Jagdpanther problem
Has he run it into a wall and compressed the recoil system? If so the recoil would keep operating as long as the barrel was compressed. It sounds like something has bent a contact and made a continuous circuit.
It may well be that the problem is inside the recoil unit, so unless he is prepared, or able, to dismantle it, he may be unable to resolve it.
It may well be that the problem is inside the recoil unit, so unless he is prepared, or able, to dismantle it, he may be unable to resolve it.
Re: Jagdpanther problem
Hi Andy You are going to have to open her up ,first thing to look at when you do is look at the recoil unit on the side and see if it is fully returning end of the stroke.I had one that did this and this was the problem, cure was make sure the barrel isnt bent or tight in the sleeve freely moving all the way to the end of stroke and that it hits the limit switch and flash .
regards pete
regards pete