Question about Torro/Henglong tank tracks

[AEDM]

i am wondering wich tank tracks are compatible with wich tanks?

I currently have a tank sitting here that i am thinking about gutting out and moving parts to another tank (not sure wich one since i dont know how easy it is or if its possible.

so is there some cheatsheet that kinda says like tank "A" has "x" tracks and these tracks also fit "Y" tank.

cause iv got quite a undesired model laying around but all the parts etc are new and lot of it is metal so i was thinking of maybe swapping it to another tank i could get for cheap with plastic running gear so i can replace it.

if anyone has any tips id appriciate it!

i am new in the hobby and id like to see if i can manage a possible swap.

[Jofaur86]

Hello, to get a possible answer? you forgot something important link below
viewforum.php?f=3

[AEDM]

Hello, to get a possible answer? you forgot something important link below
viewforum.php?f=3

thank you for reminding me!

[Exhibitedbrute]

Another important piece of information, after your introductions have been made would be from what tank including brand to what tank

[AEDM]

Another important piece of information, after your introductions have been made would be from what tank including brand to what tank

Thats what i dont know and why im asking. i dont know to what tank i want to change because i dont know if its even possible or if each tank has completely different track setup.

but the one i have is the fantasy pantiger or whatever its called. its just collecting dust and if possible id like to move the good parts over to a better tank.

So i have this heng long professional panther battletank. the fantasy one.

and i am wondering if there is any other tank from henglong or torro that uses similair parts so i could potentially swap it over.

otherwise its just sitting here being worthless.

[Exhibitedbrute]

Ok I know what you have, what are the metal parts that you want to swap over

[Exhibitedbrute]

The entire lower hull should be compatible with the henglong early tiger 1 top. You would have to replace the exhausts with the mato tiger 1 exhaust and have to do some small modifications to the rear for the fiefel filters. There are plenty of people on here who can provide you the know how when it comes to tigers. As I’m not a tiger personI can only give you the basic but, we have a few that can take you right down to the smallest detail to get that big cat exactly how it should be

[AEDM]

Ok I know what you have, what are the metal parts that you want to swap over

preferably the tracks. and if possible the motors etc. pretty much most metal stuff. though i dont know if any tanks use the same tracks or gears even.

[AEDM]

The entire lower hull should be compatible with the henglong early tiger 1 top. You would have to replace the exhausts with the mato tiger 1 exhaust and have to do some small modifications to the rear for the fiefel filters. There are plenty of people on here who can provide you the know how when it comes to tigers. As I’m not a tiger personI can only give you the basic but, we have a few that can take you right down to the smallest detail to get that big cat exactly how it should be

That sounds amazing! so i could look for a henglong early tiger 1 (probably an all plastic one) and you say the bottom tray would be compatible? is that including the gears and tracks?

hopefully some more people can guide me in the right direction. maybe even for small parts i might need.

its gonna be the first time ill be taking one apart to swap so hopefully its do able. ive never really worked on them but you gotta start somewhere i suppose.

[Exhibitedbrute]

It is possible yes but I would check with tiger 6 or mrchef as they no more about the tiger than I do