Newbie in Tanks

[pau2111]

Hello together,
I started this year with building my first Tank.
3D printed it will be a Renault FT 17 from WWI in 1/10
The STL files I got from 3dprintedtanks.com.
And now, after a lot of prints, I found the correct dates for my printer.
The track are complete and are waiting for the wheels.
Already printed, but a little bit difficult to press the 3 parts of each wheel on a Brass-tube 4 mm.
But - time is not the Problem.
When there is something to see, there will be some photos
Regards
Wolfgang

[Herr Dr. Professor]

Doch ja, Wolfgang! Hello and welcome! The photos will certainly be appreciated. Frankly, there may be much to see already in your work. I'm glad that you are joining us.

[Herr Dr. Professor]

Oops! HDP did a double post! Please erase if you can.

[tankme]

Welcome and good luck with the printing. There are quite a few of us here that print also.

[Meter rat]

Hello and welcome. I have a lot of appreciation for those who practice the dark art of printing. As others have asked, we like pictures.