[WINTER] Porsche Turret King Tiger w\Commander

[MrChef]

Alright! I give up! What is it?
IMG_20230424_190932_copy_1280x721.jpg

IIRC it's where the snorkel attachment goes. But I'm not 100% I hope someone can elaborate.

[PainlessWolf]

Gentlemen,
Here is what I found: https://www.shapeways.com/product/PUBJF ... t-complete Just another clue and kit for sale and not the be all and end all answer to this Question.
regards,
Painless

P.S. Thank you for the tips on application, Hermann. I hope that the Ultragel superglue that I use for large part application will do the trick on these 1/35 pieces. Thanks for all the encouragement, everyone. I can certainly use it. ;o)

[STHV]

Yes it's an armoured pot that covers the telescopic snorkel tube, some mid production Panther Ausf Ds had a similar if not the same system, even a few Tiger 1s had something similar.



Unfortunately I can't find an image of one extended on a Tiger II or a Panther but there are a few for Tiger I

[jee]

Alright! I give up! What is it?
IMG_20230424_190932_copy_1280x721.jpg

not sure if you already know this page, but if you scroll down, there is a picture of the back with this visible

https://tanks-encyclopedia.com/coldwar/ ... onigstiger

"Armor protection over the snorkel: this was only seen in the first 11 vehicles before February 1944."

[Kaczor]

Here you have my simplified version for free:
https://www.thingiverse.com/thing:6227353

[Herr Dr. Professor]

Ooooh! I'd bet those get the attention of the lady Tigers and Panthers.

[PainlessWolf]

*Walks up and tugs on the Herr Doctor's sleeve* ... Doc, I think all the German Machine Designations are, um, Male... ( could be wrong of course ) *chuckles*
Back to my slow arse Build.
regards,
Painless

[PainlessWolf]

Good Afternoon!
Today is a good day, weather and health-wise so I got a couple more steps on the 1/35 Hobby Boss kit completed. I am up to the 'Build and Add Tracks' step and have already looked over some others efforts on building the Kit Supplied tracks. Deciding to avoid that time sucking disaster, I found some called T-Rex Tracks that are workable and do not require glue to assemble. I ordered a set of those and will work past that Step while waiting. It is time to start priming and painting the Lower already at any rate.
regards,
Painless

photo_2023-11-05_15-09-59.jpg (162.34 KiB) Viewed 16814 times

photo_2023-11-05_15-09-50.jpg (185.04 KiB) Viewed 16814 times

photo_2023-11-05_15-09-41.jpg (98.55 KiB) Viewed 16814 times

photo_2023-11-05_15-09-28.jpg (192.52 KiB) Viewed 16814 times

photo_2023-11-05_15-09-35.jpg (182.89 KiB) Viewed 16814 times

photo_2023-11-05_15-09-20.jpg (159.35 KiB) Viewed 16814 times

photo_2023-11-05_15-08-28.jpg (93.43 KiB) Viewed 16814 times

photo_2023-11-05_15-09-06.jpg (160.35 KiB) Viewed 16814 times

[HERMAN BIX]

I wouldnt use super glue for the larger scale Zimmerit panels Mr Wolf, a 2 part epoxy type glue would give you more time to place the section in the right spot.

[PainlessWolf]

Good Morning, Herman,
Thank you for the tip, Sir. Loc-Tite makes a two part epoxy. I will look it up.
regards,
Painless