Page 1 of 2
Hello from South Florida
Posted: Sat Aug 26, 2023 3:45 pm
by Saddleup
Longtime Scale RC Enthusiast , Planes, trains, Helicopters and trucks, really like the scale side of the hobby of making the project look and act as real as possible
new to tanks just purchased a Can Shou all metal M1A2 1/16 Abrams , working on scale details and in process of attempting adding barrel smoke ,
- ccrop abrams 230826.jpg (1.34 MiB) Viewed 2447 times
Re: Hello from South Florida
Posted: Sat Aug 26, 2023 3:49 pm
by Ecam
Killer looking Abrams! Welcome aboard. That's two from Florida in two days. Did the power just come back on?
Re: Hello from South Florida
Posted: Sat Aug 26, 2023 4:52 pm
by ColemanCollector
Welcome from Ontario, Canada! What do you feed your hockey teams down there?!
Mike.
Re: Hello from South Florida
Posted: Sat Aug 26, 2023 5:25 pm
by Saddleup
thanks , now I have to figure how to connect the barrel smoke unit to the CS TK-16/TK-SWB board, this whole thing came without any documentation .and there is not much I can find online , I guess not many of these around .
Allan
Re: Hello from South Florida
Posted: Sat Aug 26, 2023 7:13 pm
by BarryC
Welcome Sir!
Re: Hello from South Florida
Posted: Sat Aug 26, 2023 8:45 pm
by tankme
Nice Abrams. Sorry, one little thing...the Vapor Compression Unit (VCU - A/C Compressor) in the rear turret bustle basket needs to be facing the other direction.
And for the TK16...here ya go:
- CS TK16 English.png (746.28 KiB) Viewed 2408 times
SWB wiring, but unfortunately I don't have it in English:
- Gun-Stabilizer-System-For-Scale-Model-Remote-Control-Tanks-Heng-Long-RC-Tank-Mato-RC-Tank-Upgrade-Parts-CS-TK-SWB-Control-Board-Interface-Description.jpg (121.48 KiB) Viewed 2408 times
Re: Hello from South Florida
Posted: Sat Aug 26, 2023 8:57 pm
by Ecam
Well Saddleup, looks like you came to the right place!
Re: Hello from South Florida
Posted: Sat Aug 26, 2023 9:52 pm
by Saddleup
Thanks for the input Derek, will remedy the VCU A/C unit and study the diagram , still would like to hear from someone that has installed the barrel smoke unit to make sure i get it right also ,Should I take this to somewhere else in the forum , if so where .
Thanks
Allan
Re: Hello from South Florida
Posted: Sat Aug 26, 2023 11:59 pm
by tankme
Can't give any other advice than that as I don't use smokers at all. More trouble than they are worth IMO. Good luck figuring it out though.
Re: Hello from South Florida
Posted: Sun Aug 27, 2023 2:51 am
by MrChef
Welcome to the forum.