Hello Mr New Me

[greenplane23]

Hi all
thank you for allowing me on here , normally a RC car/truck guy
However recently acquired a lovely Tamiya Leopard mk1 Rc 1/16 Tank
Pretty good condition with a few parts missing such as idler wheels for the metal tracks etc.
I was also wanting to know if there are any ways of making it a bit more operational , such as turning turret and up and down on the gun barrel
Any help will be muchly appreciated
Cheers
Mike

[ColemanCollector]

Welcome from Ontario, Canada!
Tamiya's are above the national budget of the Republic of Mike, so I'll be of no help other than to let you know that the turret and gun should go round and up and down. The Tamiya folks will be along to help you out and get sorted. Some pics of the tank and its guts will help out. It's a beautiful tank!
Mike.

[MrChef]

Welcome to the forum.

I'm sure you'll get help and/or guidance here.

[jarndice]

Hi Welcome to the Forum, It is always nice to know we have a wealthy member on board,
As to fixing your Leopard mk1 ODDBALL may be able to offer helpful advice,
Then of course Tom Hugill who is a master of all things Tamiya will know a great deal more than you will ever need to know.
Enjoy this place and keep asking questions.

[Jofaur86]

Hello, welcome to this forum, where you will learn a lot, there is an incredible amount of skills of all kinds, not stingy with advice, very friendly.
I do not know? if it will help you? attached links, on the Leopard, assembly instructions, and any spare parts supplier site, there are others.
https://www.tamiyausa.com/media/files/5 ... 5-3d92.pdf
https://www.axels-modellbau-shop.de/kat ... n-kit.html
Good reading, see also on the forum, Tamiya section, the various posts

[Herr Dr. Professor]

Welcome! I see that Jofaur got you some useful links. Your questions are welcome, and we will cheer for you as you get that Leopard running right. Your photos will be welcome, too, if you wish.

[Meter rat]

Hello and welcome to the forum. I am sorry, cannot help, as I am the one asking the dumb questions for help.

[Jofaur86]

Hello and welcome to the forum. I am sorry, cannot help, as I am the one asking the dumb questions for help.

There are no stupid questions, but a saying goes? if you don't know? ask, But if you know? then share. Hence the interest of the forum

[Paddyslot]

Hi and welcome