Hooben Leopard 1A5
-
Kaczor
- Warrant Officer 1st Class
- Posts: 2190
- Joined: Fri May 18, 2018 9:58 am
- Location: Ciechanow, Poland
- Contact:
Hooben Leopard 1A5
Yes, Hooben again...
- Attachments
-
- 311863943_1790193658032526_3566888815941955607_n.jpg (552.31 KiB) Viewed 1648 times
-
- 313426221_1790193708032521_3884788857931802415_n.jpg (541.24 KiB) Viewed 1648 times
-
- 312409585_1790193644699194_3815302900917869760_n.jpg (538 KiB) Viewed 1648 times
-
Raminator
- Warrant Officer 2nd Class
- Posts: 1309
- Joined: Tue Aug 11, 2015 9:57 am
- Location: Newcastle, Australia
Re: Hooben Leopard 1A5
While I'm a big fan of any Leopard 1, I'm also fussy about my models and would prefer that they've got more structural integrity than wet newspaper. I wouldn't preorder. 
-
SCHWEREPANZER
- Sergeant
- Posts: 583
- Joined: Thu Jan 08, 2015 1:40 am
Re: Hooben Leopard 1A5
Though not really into more modern armor, I think we might have to give Hooben a chance here. The lower hull is metal (for the first time from Hooben?) and the metal around the turret looks quite good.
-
Karl_Diesel
- Lance Corporal
- Posts: 117
- Joined: Thu May 04, 2017 2:42 pm
- Location: D-85128 Nassenfels/Germany
Re: Hooben Leopard 1A5
Hello,
I am also a fan of Leopard 1 and this Hooben product looks very good. But I would wait for more technical details, such as wheel suspension, track tensioning and so on
I am also a fan of Leopard 1 and this Hooben product looks very good. But I would wait for more technical details, such as wheel suspension, track tensioning and so on
regards
the Karl
active vehicles :
- Magach 6B
- BTR-80
- M1A2 SEP V2
- Tiran 5
- SPz Marder
- M113 Zelda
- Dozer D9R
under construction :
- Type 74
- Leopard 1 BARV "Samson"
- Super Pershing
- WPL 4x4 Gun Truck
the Karl
active vehicles :
- Magach 6B
- BTR-80
- M1A2 SEP V2
- Tiran 5
- SPz Marder
- M113 Zelda
- Dozer D9R
under construction :
- Type 74
- Leopard 1 BARV "Samson"
- Super Pershing
- WPL 4x4 Gun Truck
-
Koenigstiger 007
- Recruit
- Posts: 32
- Joined: Tue Apr 10, 2018 10:33 am
- Location: southern lower saxony - Germany
Re: Hooben Leopard 1A5
Hello,
I have to say at this point that it is an enrichment - albeit a late one - but the surface structure of the additional turret armor and chain covers is very neglected or non-existent. A big flaw.
Greetings
Guenther
I have to say at this point that it is an enrichment - albeit a late one - but the surface structure of the additional turret armor and chain covers is very neglected or non-existent. A big flaw.
Greetings
Guenther
>>make love - not Schrott (scrap metal)
Re: Hooben Leopard 1A5
AFAIK the Hooben Merkava also had a metal lower hull.SCHWEREPANZER wrote: ↑Fri Nov 04, 2022 2:27 pm Though not really into more modern armor, I think we might have to give Hooben a chance here. The lower hull is metal (for the first time from Hooben?) and the metal around the turret looks quite good.
-
Koenigstiger 007
- Recruit
- Posts: 32
- Joined: Tue Apr 10, 2018 10:33 am
- Location: southern lower saxony - Germany
Re: Hooben Leopard 1A5
>>make love - not Schrott (scrap metal)
Re: Hooben Leopard 1A5
It looks like the same nylon tracks and sprockets they are using on the Hooben ZTZ-99A I have. I haven't run my ZTZ outside yet so I can't comment on the durability, but the gearboxes in the ZTZ are really noisy. If they are the same tracks they are narrower than the HL and Tamiya tracks. Seeing that the ZTZ has track skirts like this one, the HL and Tamiya tracks won't fit it as they won't fit under the skirts of my ZTZ.
Derek
Too many project builds to list...
Too many project builds to list...
Re: Hooben Leopard 1A5
The sprockets are definitely different. The tracks have different guide horns but look similar dimensions. The leopard 1 tracks are narrower than the other rubber pad tracks of the L2, c2 and abrams.tankme wrote: ↑Sun Nov 06, 2022 5:25 pm It looks like the same nylon tracks and sprockets they are using on the Hooben ZTZ-99A I have. I haven't run my ZTZ outside yet so I can't comment on the durability, but the gearboxes in the ZTZ are really noisy. If they are the same tracks they are narrower than the HL and Tamiya tracks. Seeing that the ZTZ has track skirts like this one, the HL and Tamiya tracks won't fit it as they won't fit under the skirts of my ZTZ.
