need help on my Tamiya KV-1

If you have a tank query and you can't find the answer anywhere else, post here. (TIP - Check for answers in FAQ, use the 'search' facility or even check this board before posting here).
Forum rules
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
Post Reply
rr82@mediacombb.net
Recruit
Posts: 39
Joined: Mon May 02, 2022 7:52 pm

need help on my Tamiya KV-1

Post by rr82@mediacombb.net »

Building a Tamiya KV-1 tank got it almost finished but page 22 step 37 attaching upper hull, it shows front of upper hull sliding into front end of front panel assembly, but I see nothing for it to slide into. The back end gets a screw to hold rear down. Is their nothing for the front end to slide into. or am I missing something ?
Top
rr82@mediacombb.net
Recruit
Posts: 39
Joined: Mon May 02, 2022 7:52 pm

Re: need help on my Tamiya KV-1

Post by rr82@mediacombb.net »

I found the error of my ways. I glued Part D2 on the front panel the wrong way around. Now their is room for the upper hull to slide under.
Top
Post Reply

Return to “General Questions”