RC Tank Warfare community hobby forum

for info, how to refocus the turret on a Tiger I, a bit of surgery to do.

Bravo

I've sent two Tiger 1's your way for conversion

I hope this is not taken as a complaint BUT if the drawings were to the correct dimensions of the 1/16 Tiger 1 plan view of that Tanks body it would be a simple task to print off a template that could be used to carry out the fix.

jarndice wrote:I hope this is not taken as a complaint BUT if the drawings were to the correct dimensions of the 1/16 Tiger 1 plan view of that Tanks body it would be a simple task to print off a template that could be used to carry out the fix.

Désolée
not drawing to scale, but I think sufficiently explicit with the dimensions, to make the midification without worries, it is simply necessary to cut a strip of 12 mm on the front of the upper frame and transfer it behind, to do the same on the base of the turret

Son of a gun-ner wrote:Bravo

I've sent two Tiger 1's your way for conversion

Son of a gunman,
no worries, will do two more to my credit

apologies, I was wrong, on the upper frame, you have to cut behind and put in front

Ive sent 2 !!
C'mon mate, get them done already !!

Hello
Personally, I would have preferred, that someone told me if interesting, known, or not? I just wanted to share an info, issued from a French forum
Have a good day

Oh that info is most definitely interesting...............a very simple plan on how to make the Tiger a much better one.
For me, one of the most simple explanations of what the problem is, and how to fix it.

Just so I understand what is going on. The Turret on the HL is in the wrong place?