I've hit a bit of a dead end. I purchased a MAKO 2020 board, with the misguided idea that I could defeat Murphy's law. Of course, the board has some issues. The one video I could find on the installation skipped over the bits I needed. Does anyone have experience with these things? They don't seem to be super popular here.
The board is supposed to use a "microswitch replicator" from the Heng Long system. I'm converting an HL airsoft to servo recoil, and what I understand to be the microswitch only has one connector, when it is supposed to be able to connect to the MAKO and the MFU. As always, any help is appreciated.
MAKO 2020 Boards
-
PershingLover
- Corporal
- Posts: 309
- Joined: Thu Dec 05, 2019 11:37 pm
- Location: Sweden
-
Jofaur86
- Warrant Officer 1st Class
- Posts: 2172
- Joined: Tue Dec 25, 2018 11:28 pm
- Location: Centre France
Re: MAKO 2020 Boards
all i have !! but this should help?
sorry if several sends? but no longer found the last one
http://rctanksaustralia.com/store/index ... ducts_id=2
-
Jofaur86
- Warrant Officer 1st Class
- Posts: 2172
- Joined: Tue Dec 25, 2018 11:28 pm
- Location: Centre France
Re: MAKO 2020 Boards
I come to look on the last link sent, everything is well explained, there is even a specific Mako forum, all that is highlighted IN BLUE in the text, and should therefore help
