Just fitted one of these items to sherman, what a hoot ,super slow take up of speed and very slow stopping
it just goes a lot farther before it comes to a stop, so much more realistic,and when you move forward you see the tank lift it,s front like a real tank will bring this with me to cobbatton, only down side and this may just be me, but if battling with it, all tanks should be fitted with it, as where you can now turn and stop quickly, and fire etc,with this on board you have to plan ahead or be taken out very quickly .
Tell you what for £8 it,s a crackling good mod........................
Fleshy............................http://myworld.ebay.co.uk/nilesinstall/130304014133
turnigy 3 channel speed regulator
- fleshpedler
- Sergeant
- Posts: 664
- Joined: Mon Sep 15, 2008 1:36 am
- Location: weston super mare
-
- Staff Sergeant
- Posts: 938
- Joined: Sat Oct 04, 2008 7:45 am
- Location: Uxbridge, London
Re: turnigy 3 channel speed regulator
I saw the post about these on the other forum and it looked very interesting. It would be a great way to simulate inertia on a Tamiya, and at a great price. Im going to pick a few of these up on payday.
Have you got any video of the Sherman running with the regulator installed fleshy?
I like the idea of having to plan your driving, much more realistic.
Cheers,
Rik
Have you got any video of the Sherman running with the regulator installed fleshy?
I like the idea of having to plan your driving, much more realistic.
Cheers,
Rik
-
- Sergeant
- Posts: 540
- Joined: Sat Sep 27, 2008 12:04 pm
- Location: Brussels, Belgium
Re: turnigy 3 channel speed regulator
I take it you had to use two of these units
They shall not grow old as we who are left grow old.
Age shall not weary them, nor the years condemn.
At the going down of the sun and in the morning,
WE WILL REMEMBER THEM
Age shall not weary them, nor the years condemn.
At the going down of the sun and in the morning,
WE WILL REMEMBER THEM
Re: turnigy 3 channel speed regulator
Hi Pete how does it wire in is there a diagram or photos,does it act like the momentum on the el-mod and DBC.
regards pete
regards pete
Re: turnigy 3 channel speed regulator
I use servo-slow units in all my tanks (not for HengLong though - hobby radio only). They give the same effect. Much more realistic startup and stopping. You can adjust the effect too.
Is that the device you were referring to Pete?
Cheers
Chris
Is that the device you were referring to Pete?
Cheers
Chris

- fleshpedler
- Sergeant
- Posts: 664
- Joined: Mon Sep 15, 2008 1:36 am
- Location: weston super mare
Re: turnigy 3 channel speed regulator
I hope to make a film at cobatton, it only uses one unit ,wireing is very easy , just have to make a
female to female exstention, too put between the receiver and the turnigy item and just plug the dmd to the other side, it will need only a fine bit of tuning to get it spot on ,but first impressions it ,s great ,and yes Chris it is a basic servo slow but you can use it with motors...........
regret not taken photos but will add them after the weeknd event, the weather is not looking good but hell they have been wrong before..................
catch you guys then,,.. must now finish tweaking the old pershing as i am sure that Matt will kick my ass this time.............. well see................
Fleshy.............................
Let battle commence............................
female to female exstention, too put between the receiver and the turnigy item and just plug the dmd to the other side, it will need only a fine bit of tuning to get it spot on ,but first impressions it ,s great ,and yes Chris it is a basic servo slow but you can use it with motors...........
regret not taken photos but will add them after the weeknd event, the weather is not looking good but hell they have been wrong before..................
catch you guys then,,.. must now finish tweaking the old pershing as i am sure that Matt will kick my ass this time.............. well see................
Fleshy.............................
Let battle commence............................
Re: turnigy 3 channel speed regulator
I have two that came this week have not tried them yet .
Jimmy
Jimmy