Page 1 of 2
ATAK Zimmerit for Panther
Posted: Sun Aug 16, 2020 7:35 pm
by SCHWEREPANZER
Fellow Tankers,
Perhaps this belongs more appropriately in the 'Questions' section, but still, it could be topic of further discussion. The topic has been raised before, but what's happened to ATAK in their 1/16 zimmerit line? Can't seem to find it anywhere and their web site leaves me confused. Can it still be had at all? I've placed a 'want ad' in that section in furtherance of the quest.
Cheers,
Ralph
Re: ATAK Zimmerit for Panther
Posted: Sun Aug 16, 2020 8:16 pm
by john1970
Atak zimmerit is now only available from atak model so you have to order from their web site
https://atakmodel.istore.pl/en/zimmerit-1-16
Re: ATAK Zimmerit for Panther
Posted: Mon Aug 17, 2020 4:24 pm
by SCHWEREPANZER
Thanks John. Much appreciate the link. But, if you live in the USA like I do, their warning message is a little off-putting. If any here living in the good ole' USA have had any experience dealing with ATAK in these Covid times, I'd be interested in hearing of that experience as very small packages do have a way of getting lost in the crunch. Even just a yea or nay would be helpful.
Thanks chaps,
Ralph
Re: ATAK Zimmerit for Panther
Posted: Mon Aug 17, 2020 4:50 pm
by Rad_Schuhart
SCHWEREPANZER wrote:Thanks John. Much appreciate the link. But, if you live in the USA like I do, their warning message is a little off-putting. If any here living in the good ole' USA have had any experience dealing with ATAK in these Covid times, I'd be interested in hearing of that experience as very small packages do have a way of getting lost in the crunch. Even just a yea or nay would be helpful.
Thanks chaps,
Ralph
Maybe this is the perfect moment for starting creating your own zimmerit with hobby putty!
Re: ATAK Zimmerit for Panther
Posted: Mon Aug 17, 2020 5:20 pm
by jarndice
Atak got their timing about as wrong as it possibly could,
Toward the end of last year It decided to directly sell to its customers and no longer to sell its products through dealers, very shortly afterwards Covid 19 struck and the Polish Borders were shut and the Polish Mail service refused to send mail beyond the Polish Border.
So whether you are in Australia, The USA or The UK or indeed anywhere outside Poland you will have a problem accessing Atak Zimmerit through the mail or from a dealer.
Tips and Tricks on this Forum has plenty of examples of diy zimmerit some being better than others,
Why not give that section a read

Re: ATAK Zimmerit for Panther
Posted: Tue Aug 18, 2020 7:39 am
by Soeren
I just ordered ATAK Zimmerit from Sockelshop.de last month for a 1/35th scale Tiger. It wasn’t available and had to be restocked. So they must be able to source the sets from Poland. ATM they also have a set for the 1/16th scale Panther G in stock. Might be worth a look.
Re: ATAK Zimmerit for Panther
Posted: Tue Aug 18, 2020 12:55 pm
by SCHWEREPANZER
Thanks all for your suggestions and recommendations. As for giving a go at making my own brew, let me just say that I'm only now becoming comfortable with my 'weld' technique....zimmerit might just be 'a bridge too far' at this time. Soren, thanks for the solid lead. Much appreciated.
Re: ATAK Zimmerit for Panther
Posted: Thu Aug 20, 2020 10:45 am
by HERMAN BIX
I got a set(is thats what it is) from Mr Forgebear.
Re: ATAK Zimmerit for Panther
Posted: Thu Aug 20, 2020 1:27 pm
by General Jumbo01
As did l but did you get yours recently as l think he was unable to get wholesale stock in since the change. Always worth a call though. He used to have the general purpose uncut sheets too so may still have some of those.
Re: ATAK Zimmerit for Panther
Posted: Thu Aug 20, 2020 3:19 pm
by forgebear
yes you are right we tried to get stock but got told no more selling to dealers you have to go to his store to buy now
dave