Hey folks,
I'm looking for a final drive cover for a panzer iv. Cash waiting.
Panzer iv final drive cover
Forum rules
RULES LAST UPDATED 25/03/2019
Please make sure you are up to date with the Wanted section rules and guidelines before creating a new post. You can find them here: viewtopic.php?t=27359
RULES LAST UPDATED 25/03/2019
Please make sure you are up to date with the Wanted section rules and guidelines before creating a new post. You can find them here: viewtopic.php?t=27359
-
Exhibitedbrute
- Warrant Officer 1st Class
- Posts: 1654
- Joined: Tue Dec 17, 2019 12:27 am
Re: Panzer iv final drive cover
May be able to find you one raiding someone’s spares box that will never get used Not clued in with German stuff though so could I get an image?
It’s your tank it’s what you make it
-
Exhibitedbrute
- Warrant Officer 1st Class
- Posts: 1654
- Joined: Tue Dec 17, 2019 12:27 am
Re: Panzer iv final drive cover
Also any particular brand needed?
It’s your tank it’s what you make it
-
c.rainford73
- Major
- Posts: 6104
- Joined: Thu Aug 25, 2016 7:34 pm
- Location: Connecticut USA
-
c.rainford73
- Major
- Posts: 6104
- Joined: Thu Aug 25, 2016 7:34 pm
- Location: Connecticut USA
-
Exhibitedbrute
- Warrant Officer 1st Class
- Posts: 1654
- Joined: Tue Dec 17, 2019 12:27 am
Re: Panzer iv final drive cover
Oh those. No we don’t have any of those with out printing some, which I won’t get into
It’s your tank it’s what you make it
-
jarndice
- Colonel
- Posts: 8318
- Joined: Mon Sep 03, 2012 11:27 am
- Location: the mountains of hertfordshire
Re: Panzer iv final drive cover
Yet another reason not to buy the Asiatam Metal PZ4 Hull,
It comes with Metal gearbox final drive covers that are a good fit to the hull and the hull is pre-drilled for gearbox output shaft bearings, BUT if you do fit output shaft bearings the final drive covers will not fit over the bearings,
I had to clamp the covers into my milling machine and using a 2.5cm cutter I opened out the inside of the covers to make them fit.
It comes with Metal gearbox final drive covers that are a good fit to the hull and the hull is pre-drilled for gearbox output shaft bearings, BUT if you do fit output shaft bearings the final drive covers will not fit over the bearings,
I had to clamp the covers into my milling machine and using a 2.5cm cutter I opened out the inside of the covers to make them fit.
I think I am about to upset someone 
Re: Panzer iv final drive cover
That's the jigger Carl! I have 3 of those sprues and annoyingly only 1 seems to have retained its sprocket cover!c.rainford73 wrote:Like these Tom?
Sent from my SM-N975U using Tapatalk
-
c.rainford73
- Major
- Posts: 6104
- Joined: Thu Aug 25, 2016 7:34 pm
- Location: Connecticut USA
Re: Panzer iv final drive cover
they are yours if you don't mind waiting a few days for a trip across the pond!
Tanks alot.... 
Re: Panzer iv final drive cover
That would be fab, thanks carlc.rainford73 wrote:they are yours if you don't mind waiting a few days for a trip across the pond!
