Object 279 - a machine designed for nuclear war
Posted: Tue Jun 09, 2020 7:26 pm
Welcome!
Is such a project interesting?
Is such a project interesting?
RC Tank Warfare community hobby forum
RC Tank Warfare community modelling hobby forum
https://www.rctankwarfare.co.uk/forums/
Object 279 - a machine designed for nuclear war
https://www.rctankwarfare.co.uk/forums/viewtopic.php?t=29949
Page 1 of 3
Re: Object 279 - a machine designed for nuclear war
Posted: Tue Jun 09, 2020 7:49 pm
DUH, of course it is!
Re: Object 279 - a machine designed for nuclear war
Posted: Tue Jun 09, 2020 7:54 pm
Of course it is!!!! Really 
Re: Object 279 - a machine designed for nuclear war
Posted: Wed Jun 10, 2020 2:31 am
Yes indeed its cool!
Sent from my SM-N975U using Tapatalk
Sent from my SM-N975U using Tapatalk
Re: Object 279 - a machine designed for nuclear war
Posted: Wed Jun 10, 2020 2:33 am
Good evening,
I was asking Igor about one of these some time ago. It really is an awesome tank and a delight to see built! Thank you for showing this to us.
regards,
Painless
I was asking Igor about one of these some time ago. It really is an awesome tank and a delight to see built! Thank you for showing this to us.
regards,
Painless
Re: Object 279 - a machine designed for nuclear war
Posted: Wed Jun 10, 2020 6:29 pm
At the moment, all work on the project has been completed.
Work on this model began in late 2016. On the forum of my club, the process of creating a model was described. Therefore, in this topic, I will just post a translation from the club's forum.
I'll leave out the off-topic messages.
Let's start!
10.11.2016, 15:29
For a very long time, I have been considering a project to build this car on a 16m scale.
I want to put it up for a little discussion.
Tomorrow I will order a model in 1/35 scale and start creating 3D models for printing.
Work on this model began in late 2016. On the forum of my club, the process of creating a model was described. Therefore, in this topic, I will just post a translation from the club's forum.
I'll leave out the off-topic messages.
Let's start!
10.11.2016, 15:29
For a very long time, I have been considering a project to build this car on a 16m scale.
I want to put it up for a little discussion.
Tomorrow I will order a model in 1/35 scale and start creating 3D models for printing.
Re: Object 279 - a machine designed for nuclear war
Posted: Wed Jun 10, 2020 6:35 pm
10.11.2016, 17:38
The tank is very complex inside. Simply, standard elements and solutions do not fit there as in a normal tank.
From the trivial - torsion bars, it is simply impossible to install.
I will make a reservation right away, this is a guaranteed long-term construction. Not because of postponement, but simply because it always takes time (often an incredibly long time) to solve problems.
01.12.2016, 18:34
So, the model came in 1/35 scale from China.
The box arrived a couple of days ago. I didn't write, because I was thinking about whether the project is being implemented or not...
The result of thinking - the tank be!
I've already drawn the rinks and the leading star.
PS not all of the models correctly. Trust but check... I check with photos of the real car, which are not so many.
The tank is very complex inside. Simply, standard elements and solutions do not fit there as in a normal tank.
From the trivial - torsion bars, it is simply impossible to install.
I will make a reservation right away, this is a guaranteed long-term construction. Not because of postponement, but simply because it always takes time (often an incredibly long time) to solve problems.
01.12.2016, 18:34
So, the model came in 1/35 scale from China.
The box arrived a couple of days ago. I didn't write, because I was thinking about whether the project is being implemented or not...
The result of thinking - the tank be!
I've already drawn the rinks and the leading star.
PS not all of the models correctly. Trust but check... I check with photos of the real car, which are not so many.
Re: Object 279 - a machine designed for nuclear war
Posted: Wed Jun 10, 2020 6:38 pm
07.12.2016, 21:24
Work is underway:
I draw a 3D model and work out individual elements in the plastic.
The 3D model is so "heavy" for the computer hardware that it is impossible to work in this form. In addition, the computer can almost not digest a full model of a cart with two tracks... I only took a screenshot and for further work with the model, I had to delete the tracks.
Work is underway:
I draw a 3D model and work out individual elements in the plastic.
The 3D model is so "heavy" for the computer hardware that it is impossible to work in this form. In addition, the computer can almost not digest a full model of a cart with two tracks... I only took a screenshot and for further work with the model, I had to delete the tracks.
Re: Object 279 - a machine designed for nuclear war
Posted: Wed Jun 10, 2020 6:41 pm
09.12.2016, 16:04
The tracks are worked out and ready for the series.
The rollers are made for two bearings with a diameter of 10 mm on a shaft of 5 mm. The leading sprocket will most likely have a different internal diameter, but the crown will be the same.
Suspension balancer for standard spring HL (the number of turns may be different).
The tracks are worked out and ready for the series.
The rollers are made for two bearings with a diameter of 10 mm on a shaft of 5 mm. The leading sprocket will most likely have a different internal diameter, but the crown will be the same.
Suspension balancer for standard spring HL (the number of turns may be different).
Re: Object 279 - a machine designed for nuclear war
Posted: Wed Jun 10, 2020 6:51 pm
Nice, I’m following this
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk